Controlled Controlled post-sulfurization process for higher efficiency nontoxic solution-deposited CuIn0.7Ga0.3Se2 absorber thin films with graded bandgaps

摘要

A practical way of adjusting post-sulfurization process with variable durations is proposed to improve the cell-conversion efficiency of non-toxic solution driven CuIn0.7Ga0.3Se2 absorber thin films. The degree of bandgap grading was controllable by changing the sulfurization time from 2 min to 30 min due to the dissimilar distribution of sulfur across the absorber layer. Deeper intensified distributions of Ga and S were responsible for enhancements in the open-circuit voltage and cell-conversion efficiency. A competitive efficiency of similar to 8.81% for the 10 min-sulfurized CIGSSe cell was achieved with other promising parameters, i.e., short-circuit current density of 33.17 mA/cm(2), open-circuit voltage of 0.496 V, and fill factor of 53.5%, resulting from the improved carrier collection and reduced recombination by the bandgap grading. This improved efficiency corresponds to a similar to 15.6% enhancement compared to the unsulfurized sample. (C) 2017 Elsevier B.V. All rights reserved.