首页> 外文期刊>Physics in medicine and biology. >Characterisation of noise and sharpness of images from four digital breast tomosynthesis systems for simulation of images for virtual clinical trials
【24h】

Characterisation of noise and sharpness of images from four digital breast tomosynthesis systems for simulation of images for virtual clinical trials

机译:四种数字乳房断层合成系统噪声和锐度的特征,用于模拟虚拟临床试验

获取原文
获取原文并翻译 | 示例
       

摘要

In-depth evaluation of the noise and sharpness characteristics of FujiFilm Innovality, GE SenoClaire, Hologic Selenia Dimensions and Siemens Inspiration digital breast tomosynthesis (DBT) systems was performed with the intention of improving image simulation for virtual clinical trials. Noise power spectra (NPS) and modulation transfer function curves (MTF) were measured for planar modes and for the first and central projections for DBT modes. In DBT mode, the x-ray beam was blocked for the projections before the central projection in order to remove the influence of lag and ghosting from the previous images. A quadratic fit between the NPS and linearised pixel value gave the noise coefficients for planar and DBT imaging modes. The spatial frequencies corresponding to an MTF of 0.5 (MTF0.5) were calculated from the MTF measurements made on the breast support and at 40 mm above the breast support. This was done for the first and the central projections. The percentage of signal carried over from the first projection to subsequent images (lag) was measured using a slit. The noise associated with lag was also evaluated. The DBT modes typically had lower electronic noise coefficients but higher structural noise coefficients compared to the respective planar mode MTF0.5 measured 40 mm above the table was between 6% and 47% lower for continuous scanning systems compared to 1% lower for step and shoot systems. For wide angle DBT, the MTF0.5 of the first projection was 18% (FujiFilm) and 28% (Siemens) lower than for the central projection. Lag in the second projection was 2.2%, 0.3%, 0.8% for the FujiFilm, GE and Hologic systems respectively. In all cases, the noise associated with lag was negligible. Current modelling frameworks for virtual clinical trials of breast DBT systems need to be adapted to account for signals from lag and variations in the MTF at wide angles.
机译:深入评估富吉弗姆创新的噪声和锐度特征,GE Senoclaire,Hologic Selenia尺寸和西门子灵感数字乳房断层合成(DBT)系统进行了旨在改善虚拟临床试验的图像模拟。测量噪声功率谱(NPS)和调制传递函数曲线(MTF),用于平面模式和用于DBT模式的第一和中央投影。在DBT模式下,X射线束被阻挡用于中央投影前的突起,以便从前一张图像去除滞后和重影的影响。在NPS和线性异化像素值之间具有二次拟合,为平面和DBT成像模式提供了噪声系数。与MTF的空间频率与0.5(MTF0.5)的MTF进行计算,从乳房支撑件上的MTF测量和高于乳房载体上方40毫米。这是为第一和中央预测完成的。使用狭缝测量从第一投影到后续图像(滞后)的信号的百分比。还评估了与滞后相关的噪声。 DBT模式通常具有较低的电子噪声系数,但与桌子上方40mm测量的相应平面模式MTF0.5相比,较高的结构噪声系数为连续扫描系统的6%至47%之间,比较阶梯和拍摄的1%降低系统。对于广角DBT,第一投影的MTF0.5为18%(FUJIFILM)和28%(西门子)低于中央投影。第二投影中的滞后分别为富士米,GE和HOLOG系统的2.2%,0.3%,0.8%。在所有情况下,与滞后相关的噪声可以忽略不计。目前,用于乳房DBT系统的虚拟临床试验的日常建模框架需要适应于在宽角度下滞后的信号和MTF的变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号