首页> 外文期刊>Electrochimica Acta >85 MeV C6+ swift heavy ion irradiation of in-situ reduced graphene oxide-polypyrrole nanotubes nanocomposite films for supercapacitor electrodes
【24h】

85 MeV C6+ swift heavy ion irradiation of in-situ reduced graphene oxide-polypyrrole nanotubes nanocomposite films for supercapacitor electrodes

机译:85 MeV C6 + Swift重型离子照射原位的石墨烯氧化物 - 聚吡咯纳米管用于超级电容器电极的纳米复合材料薄膜

获取原文
获取原文并翻译 | 示例
           

摘要

Hybrid nanocomposites of reduced graphene oxide (RGO) and polypyrrole nanotubes (PPyNTs) have been synthesized by in-situ reduction of graphene oxide. The nanocomposite films are modified by swift heavy ion irradiation with 85 MeV C6+ ions at different fluences of 6 x 10(10), 3.6 x 10(11), 2.2 x 10(12) and 1.3 x 10(13) ions cm(-2). Morphological, structural, thermal and electrical properties of the irradiated nanocomposites have been investigated by FESEM, HRTEM, XRD, thermogravimetric analyzer and conductivity measurements. The BET specific surface area and porosity of the nanocomposites have been determined by N-2 adsorption-desorption measurements. The fluence dependent electrochemical performance of the irradiated nanocomposites as electrodes has been studied by cyclic voltammetry, galvanostatic charge-discharge and impedance spectroscopy. The electrochemical studies reveal that the capacitive properties improved upto a fluence of 2.2 x 10(12) ions cm(-2) and decreases at higher fluence. A highest specific capacitance of 346 F g(-1) and cyclic stability of 89% is achieved for the irradiated nanocomposite compared to 299 F g(-1) and 77% of that of pristine. The increase of capacitive performance may be ascribed to the increase in surface area and pore size of the pristine electrode with increasing irradiation fluence, which extends the ion transport from the surface to the bulk of the electrode. Decrease in the diameter of PPyNTs is observed from FESEM images with increase in ion fluence, which may also contribute to higher charge storage by increasing the overall surface area of the electrode. (c) 2017 Elsevier Ltd. All rights reserved.
机译:还原的石墨烯氧化物(RGO)和聚吡咯纳米管(PPyNTs)的混合纳米复合材料已经通过在原位还原氧化石墨烯的合成。所述纳米复合材料薄膜是由快重离子辐照以85兆根电子伏C6 +离子以6×10(10),不同能量密度改性,3.6×10(11),2.2×10(12)和1.3×10(13)离子厘米( - 2)。形态,照射纳米复合材料的结构,热和电性能已经通过FESEM,HRTEM,XRD,热重分析仪和电导率测量的影响。纳米复合材料的BET比表面积和孔隙率已经通过N-2吸附 - 脱附测量来确定。所照射的纳米复合材料作为电极的能量密度依赖性的电化学性能进行了研究通过循环伏安法,恒电流充放电和阻抗谱。电化学研究表明,所述电容性高达2.2×10(12)的注量提高离子厘米(-2)和在较高的能量密度降低。的346 F G(-1)和89%的循环稳定性最高的比电容为所照射的纳米复合材料相比,299 F G(-1)和那原始的77%来实现的。的电容性性能的增加可以归因于在表面面积且随照射积分通量,其延伸从表面到本体电极的离子传送的原始的电极的孔尺寸的增加。减少PPyNTs的直径从FESEM图像中观察到与增加的离子通量,这也可通过增加电极的总表面积有助于提高电荷存储。 (c)2017 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号