Improved method of measuring pressure coupled response for composite solid propellants

摘要

Pressure coupled response is one of the main causes of combustion instability in the solid rocket motor. It is also a characteristic parameter for predicting the stability. The pressure coupled response function is usually measured by different methods to evaluate the performance of new propellant. Based on T-burner and "burning surface doubled and secondary attenuation", an improved method for measuring the pressure coupled response of composite propellant is introduced in this article. A computational fluid dynamics (CFD) study has also been conducted to validate the method and to understand the pressure oscillation phenomenon in T-burner. Three rounds of tests were carried out on the same batch of aluminized AP/HTPB composite solid propellant. The experimental results show that the sample propellant had a high response function under the conditions of high pressure (?11.5 MPa) and low frequency (?140 Hz). The numerically predicted oscillation frequency and amplitude are consistent with the experimental results. One practical solid rocket motor using this sample propellant was found to experience pressure oscillation at the end of burning. This confirms that the sample propellant is prone to combustion instability. Finally, acoustic pressure distribution and phase difference in T-burner were analyzed. Both the experimental and numerical results are found to be associated with similar acoustic pressure distribution. And the phase difference analysis showed that the pressure oscillations at the head end of the T-burner are 180° out of phase from those in the aft end of the T-burner.