The morphology and mechanical properties of chitosan fibers obtained by wet-spinning using chitosan-[Gly]Cl (glycine chloride) ionic liquid as spinning dope solution are reported for the first time. The objectives were to understand both how the microstructure of the fibers could be modified and how the mechanical properties were improved by means of using [Gly]Cl ionic liquid as the spinning solution. In the new system, the main component chitosan (the degree of deacetylation was 86%, the molecular weight was about 1.5 x 10~6) was dissolved in an aqueous [Gly]Cl ionic liquid solution; the fibers were then spun using a sodium sulfate (Na2SO4)/ethanol (C2H5OH) aqueous solution as the coagulant, and then directly dried under freeze-drying. The fibers spun from the above mentioned system have the chitosan I crystal form, and the breaking tenacity (3.77 cN dtex~(-1)) is 4 times more than that (0.86 cN dtex~(-1)) from an acetic acid system. The orientation and crystallinity of fibers spun in [Gly]Cl solution was enhanced with an increase of spin stretch ratio, and thereby the mechanical properties of the fibers were improved. Moreover, the fibers had a smooth surface as well as a round and compact structure. More to the point, the used [Gly]Cl could be recovered by simple post processing and the chitosan fibers spun in the recycled [Gly]Cl solution also had a strong breaking tenacity. Therefore, this study verified that [Gly]Cl is a new spinning dope solution for preparing chitosan fibers with strong mechanical properties.
展开▼
