首页> 外文期刊>Journal of Materials Science >Polyethyleneimine-functionalized large pore ordered silica materials for poorly water-soluble drug delivery
【24h】

Polyethyleneimine-functionalized large pore ordered silica materials for poorly water-soluble drug delivery

机译:聚乙烯亚胺官能化的大孔有序二氧化硅材料,用于水溶性差的药物输送

获取原文
获取原文并翻译 | 示例
           

摘要

Four ordered mesoporous silica supports with different pore structure characteristics were investigated for their drug loading and release abilities with regard to their structural variabilities as well as implications of surface modification. The (model) drug molecule in question was the poorly water-soluble glucocorticoid Prednisolone, composed of a steroid skeleton with functional groups in the form of carbonyls and hydroxyls. Under non-aqueous conditions, such as those applied for drug loading, these functional groups are expected to interact with the surface silanols of the silica supports, but this interaction could possibly also be enhanced by introducing amino groups to the silica surfaces. Thus, all four supports were further functionalized by surface hyperbranching of polyethyleneimine), PEI, which was successfully incorporated to all supports in high amounts (>30 wt%). However, the accessibility of the pore system after organic modification was dependent on the pore sizes and structures, highlighting the importance of using large-pore mesophases with adequate structures when aiming for applications involving (bulky) guest molecules. Additionally, after incorporation of large amounts of guest molecules (40 wt%), full water accessibility was retained in that the loaded cargo could be rapidly released from the carrier matrixes, which is a crucial requirement when formulating poorly soluble substances. Results displayed that the release of Prednisolone from the silica supports occurred faster than the dissolution of the pure drug. All silica materials released more than 85 % of the adsorbed drug in 5 h, independently of the support material. Thus, the confinement of Prednisolone inside the mesopores seems to be the main reason for the faster kinetic release rate. These constraints imply that Prednisolone becomes more mobile inside the pores, and therefore more soluble in release medium. These results confirm the potential of silica supports as drug delivery carriers for drugs with limited water solubility such as steroids.
机译:研究了四种具有不同孔结构特征的有序介孔二氧化硅载体的载药量和释放能力,以及它们的结构变异性以及表面修饰的意义。所讨论的(模型)药物分子是水溶性差的糖皮质激素泼尼松龙,它由甾体骨架组成,具有以羰基和羟基形式存在的官能团。在非水性条件下,例如用于载药的条件,这些官能团有望与二氧化硅载体的表面硅烷醇相互作用,但是这种相互作用也可能通过将氨基引入二氧化硅表面而得到增强。因此,通过聚乙烯亚胺的表面超支化,PEI将所有四个载体进一步官能化,PEI成功地以大量(> 30重量%)掺入所有载体中。但是,有机改性后孔隙系统的可及性取决于孔隙的大小和结构,这突出了在针对涉及(大体积)客体分子的应用中使用具有适当结构的大孔中间相的重要性。另外,在掺入大量客体分子(40 wt%)之后,保留了充分的水可及性,因为装载的货物可以从载体基质中快速释放出来,这在配制难溶物质时是至关重要的要求。结果表明,泼尼松龙从二氧化硅载体上的释放比纯药物的溶解快。所有二氧化硅材料均在5小时内释放了超过85%的吸附药物,而与载体材料无关。因此,泼尼松龙在中孔内的封闭似乎是动力学释放速率更快的主要原因。这些限制意味着泼尼松龙在孔内变得更具流动性,因此更易溶于释放介质中。这些结果证实了二氧化硅载体作为药物输送载体的潜力,可用于水溶性有限的药物,例如类固醇。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号