首页> 外文期刊>Journal of Materials Processing Technology >Inductive heating effects on friction surfacing of stainless steel onto an aluminium substrate
【24h】

Inductive heating effects on friction surfacing of stainless steel onto an aluminium substrate

机译:感应加热对不锈钢在铝基板上的表面摩擦的影响

获取原文
获取原文并翻译 | 示例
           

摘要

An experimental setup was designed to compare the principal process parametric relationships with the classical approach to friction surfacing with the addition of inductive heating. The production of the flash is described quantitatively and its influence on coating geometry and mass is presented. It was found that the coating mass and thickness decreased for an increase in the rotational speed of the consumable rod; the amount of flash produced by the consumable rod also increased. However, the effect of an increase in this rod contact pressure on the coating thickness is insignificant, whilst the coating mass decreases with rising pressure and the coating width increases coupled with an increase in flash production. Cross sections showed good bonding quality and mechanical interlocking at the bond interface. The substrate-coating interface showed a varying degree of mechanical interlocking and the presence of cavitations. Bond strength values applying shear and push-off testing of up to 106 MPa and 96 MPa, respectively, could be identified. (C) 2014 Elsevier B.V. All rights reserved.
机译:设计了一个实验装置,以比较主要过程参数关系与添加感应加热的经典摩擦表面处理方法。定量描述了溢料的产生,并给出了其对涂层几何形状和质量的影响。已经发现,随着消耗杆的旋转速度的增加,涂层的质量和厚度减小。消耗杆产生的毛边数量也增加了。然而,该杆接触压力的增加对涂层厚度的影响是微不足道的,而涂层质量随着压力的升高而减小,并且涂层宽度增加,同时飞边产量增加。横截面显示出良好的粘合质量和在粘合界面上的机械互锁。基材与涂层的界面显示出不同程度的机械互锁和空化现象。可以确定分别应用高达106 MPa和96 MPa的剪切和推挤测试的粘结强度值。 (C)2014 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号