...
首页> 外文期刊>Journal of Applied Polymer Science >Macroporous dehydroalanine polymer hydrogel with fast temperature response and high repetition durability
【24h】

Macroporous dehydroalanine polymer hydrogel with fast temperature response and high repetition durability

机译:具有快速温度响应和高重复耐久性的大孔脱氢丙氨酸聚合物水凝胶

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Thermoresponsive hydrogels based on poly(methyl 2-isobutyramidoacrylate) (PMIBA) were prepared by free-radical crosslinking polymerization of the corresponding monomer using N,N'-methylenebisacrylamide as a crosslinker. The PMIBA hydrogels showed a reversible temperature-induced volume change with a volume phase transition temperature (VPTT) at 19°C, while they contained more than 60 wt % water even in the equilibrium deswollen state. When the external temperature was raised rapidly above the VPTT, the PMIBA gels shrank smoothly with time at a faster rate than conventional poly(N- isopropylacrylamide) hydrogels of the same size. The fast and smooth deswelling response of the PMIBA gel is ascribed to its sponge-like structure with 0.1-1 μm pore sizes formed in the deswollen state. The smooth deswelling response due to the macroporous structure resulted in high durability against repeated changes in the external temperature. The PMIBA gel showed little degradation in the swelling ability when subjected to 50 times of thermal cycling across the VPTT.
机译:通过使用N,N'-亚甲基双丙烯酰胺作为交联剂,通过对相应单体进行自由基交联聚合反应,制备了基于聚(2-异丁酰甲基丙烯酸甲酯)(PMIBA)的热敏水凝胶。 PMIBA水凝胶在19°C下随体积相变温度(VPTT)表现出可逆的温度诱导的体积变化,而即使在平衡溶胀状态下,它们也包含超过60 wt%的水。当外部温度迅速升高到VPTT以上时,PMIBA凝胶随时间平滑收缩,其速度比相同大小的常规聚N-异丙基丙烯酰胺水凝胶快。 PMIBA凝胶的快速,平稳的溶胀反应归因于其海绵状结构,在溶胀状态下形成的孔径为0.1-1μm。由于具有大孔结构,因此具有平滑的溶胀反应,因此可以抵抗外部温度的反复变化,从而具有很高的耐久性。当在VPTT上进行50次热循环时,PMIBA凝胶的溶胀能力几乎没有下降。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号