...
首页> 外文期刊>Journal of Applied Polymer Science >Viscoelastic Properties and Characterization of Inorganic Particulate-Filled Polymer Composites
【24h】

Viscoelastic Properties and Characterization of Inorganic Particulate-Filled Polymer Composites

机译:无机颗粒填充聚合物复合材料的粘弹性和表征

获取原文
获取原文并翻译 | 示例

摘要

To identify effects of glass bead (GB) content on the dynamic mechanical properties of filled low-density-polyethylene (LDPE) composites, the storage modulus, loss modulus, glass transition temperature, and mechanical damping of these composites were measured using a Du Pont dynamical mechanical analysis instrument in temperature range from -150 to 100 degrees C. It was found that the storage modulus increased nonlinearly with an increase of the GB volume fraction. On the basis of Eshelby's method and Mori's work, an equation describing the relationship between the relative storage modulus (E-R') and filler volume fraction for polymeric composites was proposed, and the E-R' of LDPE/GB composites were estimated by means of this equation at temperatures of -25, 0, and 25 degrees C, and the calculations were compared with the experimental data, good agreement was showed between the predictions and the measured data. Furthermore, this equation was verified by the experimental from Al(OH)(3) filled EPDM composites at glassy state reported in a reference.
机译:为了确定玻璃珠(GB)含量对填充的低密度聚乙烯(LDPE)复合材料动态力学性能的影响,使用杜邦(Du Pont)测量了这些复合材料的储能模量,损耗模量,玻璃化转变温度和机械阻尼动态力学分析仪器在-150至100摄氏度的温度范围内。发现,储能模量随着GB体积分数的增加而非线性增加。根据Eshelby方法和Mori的工作,提出了描述聚合物复合材料相对储能模量(E-R')与填料体积分数之间关系的方程,并通过以下方法估算LDPE / GB复合材料的ER':该方程在-25、0和25摄氏度的温度下进行计算,并将计算结果与实验数据进行比较,表明预测值与实测数据之间具有很好的一致性。此外,该方程由参考文献中报道的由玻璃态的Al(OH)(3)填充的EPDM复合材料进行的实验验证。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号