...
首页> 外文期刊>Surface & Coatings Technology >Improvement in oxidation properties of SiC-coated carbon/carbon composites through modification of the SiC/carbon interface
【24h】

Improvement in oxidation properties of SiC-coated carbon/carbon composites through modification of the SiC/carbon interface

机译:通过修饰SiC /碳界面改善SiC涂层碳/碳复合材料的氧化性能

获取原文
获取原文并翻译 | 示例
           

摘要

To improve the oxidation resistance of C/C composites, SiC coating was prepared on the mild-oxidized composites by pack cementation method. Through short time mild-oxidation at 800 °C–1100 °C, thick transition coating could be obtained at interface and minimize the mismatch of thermal expansion coefficient (CTE) between SiC coating and C/C composites. The oxidation resistance of SiC coating was improved obviously, owing to the decrease of crack size. After 14 h oxidation at 1500 °C, the sample mild-oxidized at medium temperature with SiC coating still gained weight 0.3%, but the bending strength was only 83.7% of original strength. However, the bending strength of sample mild-oxidized at high temperature with SiC coating increased by 17.2%.
机译:为了提高C / C复合材料的抗氧化性,采用填充胶结法在轻度氧化的复合材料上制备了SiC涂层。通过在800°C–1100°C下进行短时间的轻度氧化,可以在界面处获得厚的过渡涂层,并最大程度地减小SiC涂层与C / C复合材料之间的热膨胀系数(CTE)的不匹配。由于裂纹尺寸的减小,SiC涂层的抗氧化性得到了明显改善。在1500°C氧化14小时后,在中等温度下用SiC涂层轻度氧化的样品仍增加了0.3%的重量,但弯曲强度仅为原始强度的83.7%。但是,在高温下经SiC涂层轻度氧化的样品的弯曲强度提高了17.2%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号