...
首页> 外文期刊>The journal of physical chemistry, A. Molecules, spectroscopy, kinetics, environment, & general theory >Pressure dependence and branching ratios in the decomposition of 1-pentyl radicals: Shock tube experiments and master equation modeling
【24h】

Pressure dependence and branching ratios in the decomposition of 1-pentyl radicals: Shock tube experiments and master equation modeling

机译:1-戊基自由基分解中的压力依赖性和支化比:冲击管实验和主方程模型

获取原文
获取原文并翻译 | 示例
           

摘要

The decomposition and intramolecular H-transfer isomerization reactions of the 1-pentyl radical have been studied at temperatures of 880 to 1055 K and pressures of 80 to 680 kPa using the single pulse shock tube technique and additionally investigated with quantum chemical methods. The 1-pentyl radical was generated by shock heating dilute mixtures of 1-iodopentane and the stable products of its decomposition have been observed by postshock gas chromatographic analysis. Ethene and propene are the main olefin products and account for >97% of the carbon balance from 1-pentyl. Also produced are very small amounts of (E)-2-pentene, (Z)-2-pentene, and 1-butene. The ethene/propene product ratio is pressure dependent and varies from about 3 to 5 over the range of temperatures and pressures studied. Formation of ethene and propene can be related to the concentrations of 1-pentyl and 2-pentyl radicals in the system and the relative rates of five-center intramolecular H-transfer reactions and β C-C bond scissions. The 3-pentyl radical, formed via a four-center intramolecular H transfer, leads to 1-butene and plays only a very minor role in the system. The observed (E/Z)-2-pentenes can arise from a small amount of beta C-H bond scission in the 2-pentyl radical. The current experimental and computational results are considered in conjunction with relevant literature data from lower temperatures to develop a consistent kinetics model that reproduces the observed branching ratios and pressure effects. The present experimental results provide the first available data on the pressure dependence of the olefin product branching ratio for alkyl radical decomposition at high temperatures and require a value of 〈ΔE _(down)(1000 K)〉 = (675 ~± 100) cm ~(-1) for the average energy transferred in deactivating collisions in an argon bath gas when an exponential-down model is employed. High pressure rate expressions for the relevant H-transfer reactions and β bond scissions are derived and a Rice Ramsberger Kassel Marcus/Master Equation (RRKM/ME) analysis has been performed and used to extrapolate the data to temperatures between 700 and 1900 K and pressures of 10 to 1 × 10 ~5 kPa.
机译:使用单脉冲激波管技术在880至1055 K的温度和80至680 kPa的压力下研究了1-戊基自由基的分解和分子内H转移异构化反应,并另外通过量子化学方法进行了研究。 1-戊基自由基是通过震荡加热1-碘戊烷的稀混合物生成的,其分解的稳定产物已通过震后气相色谱分析观察到。乙烯和丙烯是主要的烯烃产物,占1-戊基碳平衡的> 97%。还产生非常少量的(E)-2-戊烯,(Z)-2-戊烯和1-丁烯。乙烯/丙烯产物比取决于压力,并且在所研究的温度和压力范围内为约3至5。乙烯和丙烯的形成可能与系统中1-戊基和2-戊基自由基的浓度以及五中心分子内H转移反应和βC-C键断裂的相对速率有关。通过四个中心的分子内H转移形成的3-戊基自由基生成1-丁烯,并且在系统中仅起很小的作用。观察到的(E / Z)-2-戊烯可能是由2-戊基中的少量βC-H键断裂引起的。结合来自较低温度的相关文献数据来考虑当前的实验和计算结果,以开发出一致的动力学模型,该模型可再现观察到的分支比和压力效应。本实验结果提供了关于高温下烯烃基自由基分解所用烯烃产物支化比的压力依赖性的第一个可用数据,并要求值<ΔE_(down)(1000 K)> =(675〜±100)cm当采用指数下降模型时,在氩浴气体中钝化碰撞中转移的平均能量约为(-1)。推导了有关H转移反应和β键断裂的高压速率表达式,并进行了Rice Ramsberger Kassel Marcus / Master方程(RRKM / ME)分析,并将其推断为700至1900 K和压力之间的温度10至1×10〜5 kPa。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号