...
首页> 外文期刊>Urology >Determinants of Holmium:Yttrium-aluminum-garnet laser time and energy during ureteroscopic laser lithotripsy
【24h】

Determinants of Holmium:Yttrium-aluminum-garnet laser time and energy during ureteroscopic laser lithotripsy

机译:输尿管镜激光碎石术中::钇铝石榴石激光时间和能量的决定因素

获取原文
获取原文并翻译 | 示例

摘要

Objective To evaluate the association of preoperative noncontrast computed tomography stone characteristics, laser settings, and stone composition with cumulative holmium:yttrium-aluminum-garnet (Ho:YAG) laser time/energy. Materials and Methods We retrospectively reviewed patients who underwent semirigid/flexible ureteroscopy and Ho:YAG laser lithotripsy (200 or 365 μm laser fiber; 0.8-1.0 J energy; and 8-10 Hz rate) at 2 tertiary care centers (April 2010-May 2012). Studied parameters were as follows: patient's characteristics; stone characteristics (location, burden, hardness, and composition); total laser time and energy; and surgical outcomes. Results One hundred patients met our inclusion criteria. Mean stone size was 1.01 ± 0.42 cm and volume 0.33 ± 0.04 cm3. Mean stone radiodensity was 990 ± 296 HU, and Hounsfield units density 13.8 ± 6.0 HU/mm. All patients were considered stone free. Stone size and volume had a significant positive correlation with laser energy (R = 0.516, P .001; R = 0.621, P .001) and laser time (R = 0.477, P .001; R = 0.567, P .001). When controlling for stone size, only the correlation between HU and laser time was significant (R = 0.262, P =.011). In the multivariate analysis, with exception of stone composition (P =.103), all parameters significantly increased laser energy (R2 = 0.524). Multivariate analysis revealed a positive significant association of laser time with stone volume (P .001) and Hounsfield units density (P .001; R2 = 0.512). In multivariate analysis for laser energy, only calcium phosphate stones required less energy to fragment compared with uric acid stones. No significant differences were found in the multivariate laser time model. Conclusion Ho:YAG laser cumulative energy and total time are significantly affected by stone dimensions, hardness location, fiber size, and power. Kidney location, laser fiber size, and laser power have more influence on the final laser energy than on the total laser time. Calcium phosphate stones require less laser energy to fragment.
机译:目的评估术前非对比计算机断层扫描的宝石学特征,激光设置和结石与with,钇铝石榴石(Ho:YAG)累积激光时间/能量的关系。材料和方法我们回顾性分析了在两个三级护理中心接受半刚性/柔性输尿管镜和Ho:YAG激光碎石术(200或365μm激光纤维; 0.8-1.0 J能量; 8-10 Hz频率)的患者(2010年5月至5月) 2012)。研究的参数如下:患者特征;石材特性(位置,负担,硬度和成分);总激光时间和能量;和手术结果。结果100名患者符合我们的纳入标准。平均石材尺寸为1.01±0.42 cm3,体积为0.33±0.04 cm3。平均石材放射性密度为990±296 HU,而Hounsfield单位密度为13.8±6.0 HU / mm。所有患者均被视为无结石。宝石的大小和体积与激光能量(R = 0.516,P <.001; R = 0.621,P <.001)和激光时间(R = 0.477,P <.001; R = 0.567,P < .001)。当控制结石尺寸时,只有HU和激光时间之间的相关性很显着(R = 0.262,P = .011)。在多变量分析中,除了石材成分(P = .103)外,所有参数均显着增加了激光能量(R2 = 0.524)。多变量分析显示激光时间与结石体积(P <.001)和Hounsfield单位密度(P <.001; R2 = 0.512)呈显着正相关。在激光能量的多变量分析中,与尿酸结石相比,仅磷酸钙结石需要的能量更少。在多元激光时间模型中未发现显着差异。结论Ho:YAG激光的累积能量和总时间受石材尺寸,硬度位置,纤维尺寸和功率的影响很大。肾脏位置,激光纤维大小和激光功率对最终激光能量的影响大于对总激光时间的影响。磷酸钙结石需要较少的激光能量才能破碎。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号