首页> 外文期刊>Physical chemistry chemical physics: PCCP >Solution-processed n-type fullerene field-effect transistors prepared using CVD-grown graphene electrodes: improving performance with thermal annealing
【24h】

Solution-processed n-type fullerene field-effect transistors prepared using CVD-grown graphene electrodes: improving performance with thermal annealing

机译:使用CVD生长的石墨烯电极制备的固溶处理n型富勒烯场效应晶体管:通过热退火提高性能

获取原文
获取原文并翻译 | 示例
           

摘要

Solution-processed organic field effect transistors (OFETs), which are amenable to facile large-area processing methods, have generated significant interest as key elements for use in all-organic electronic applications aimed at realizing low-cost, lightweight, and flexible devices. The low performance levels of n-type solution-processed bottom-contact OFETs unfortunately continue to pose a barrier to their commercialization. In this study, we introduced a combination of CVD-grown graphene source/drain (S/D) electrodes and fullerene (C-60) in a solution-processable n-type semiconductor toward the fabrication of n-type bottom-contact OFETs. The C-60 coating in the channel region was achieved by modifying the surface of the oxide gate dielectric layer with a phenyl group-terminated self-assembled monolayer (SAM). The graphene and phenyl group in the SAMs induced pi-pi interactions with C-60, which facilitated the formation of a C-60 coating. We also investigated the effects of thermal annealing on the reorganization properties and field-effect performances of the overlaying solution-processed C-60 semiconductors. We found that thermal annealing of the C-60 layer on the graphene surface improved the crystallinity of the face-centered cubic (fcc) phase structure, which improved the OFET performance and yielded mobilities of 0.055 cm(2) V-1 s(-1). This approach enables the realization of solution-processed C-60-based FETs using CVD-grown graphene S/D electrodes via inexpensive and solution-process techniques.
机译:适于方便的大面积处理方法的溶液处理有机场效应晶体管(OFET)已经引起了人们的广泛兴趣,作为用于实现低成本,轻便和灵活器件的全有机电子应用中的关键元件。不幸的是,n型溶液处理的底部接触式OFET的低性能水平继续对其商业化构成障碍。在这项研究中,我们在可溶液处理的n型半导体中引入了由CVD生长的石墨烯源/漏(S / D)电极和富勒烯(C-60)的组合,以制造n型底部接触式OFET。通过用苯基端基的自组装单分子层(SAM)修饰氧化物栅极介电层的表面,可以在沟道区实现C-60涂层。 SAM中的石墨烯和苯基诱导了与C-60的pi-pi相互作用,从而促进了C-60涂层的形成。我们还研究了热退火对覆层溶液处理的C-60半导体的重组性能和场效应性能的影响。我们发现石墨烯表面C-60层的热退火改善了面心立方(fcc)相结构的结晶度,从而改善了OFET性能并产生了0.055 cm(2)V-1 s(- 1)。通过廉价的溶液处理技术,这种方法可以使用CVD生长的石墨烯S / D电极实现溶液处理的基于C-60的FET。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号