...
首页> 外文期刊>Langmuir: The ACS Journal of Surfaces and Colloids >Poly(ethylene glycol) Conjugated Poly(lactide)-Based Polyelectrolytes: Synthesis and Formation of Stable Self-Assemblies Induced by Stereocomplexation
【24h】

Poly(ethylene glycol) Conjugated Poly(lactide)-Based Polyelectrolytes: Synthesis and Formation of Stable Self-Assemblies Induced by Stereocomplexation

机译:聚(乙二醇)共轭的基于聚丙交酯的聚电解质:立体络合诱导的稳定自组装体的合成与形成

获取原文
获取原文并翻译 | 示例

摘要

A series of pH-responsive amphiphilic poly(N,N-dimethylaminoethyl methacrylate)-block-poly(d-lactic acid)-block-poly(N,N-dimethylaminoethyl methacrylate) conjugated with poly(ethylene glycol) (D-PDLA-D@PEG) and D-PLLA-D@PEG copolymers were synthesized using a combination of ring-opening polymerization and atom-transfer radical polymerization followed by sequential quaternization of PDMAEMA chains and azide-alkyne click reaction with alkyne-end PEG. Gel permeation chromatography, nuclear magnetic resonance, and Fourier transform infrared spectroscopy results demonstrate the successful synthesis of the copolymers, and the conjugated PEG percentages in the copolymers can be tuned by the feeding ratios in the quaternization reaction. Conjugating PEG onto the PDMAEMA segments also successfully facilitated the D-PDLA-D@PEG, D-PLLA-D@PEG, and its corresponding 1:1 D/L mixtures to be dissolved directly in aqueous solution at the desired concentration range without using any organic solvents unlike the copolymers without PEG conjugation (D-PDLA-D and D-PLLA-D). We demonstrate control over micellar size, charge, and stability via three different preparation pathways, i.e., solution pH, percentages of PEG conjugation in the copolymers, and formation of PLA stereocomplex in micellar core. Static and dynamic light scattering studies demonstrate that the size of the core-shell micelles increases when the solution pH is reduced due to the protonation of the PDMAEMA segments that caused the osmotic pressure within the micelle to increase until the micelles reached a maximum size. It is interesting to note that the micelles formed by 1:1 D/L mixtures have larger swelling ratios as well as aggregation number and hydrodynamic radius that do not change significantly with pH and dilution, respectively, as compared to micelles formed from individual D or L forms of the copolymers. The enhanced stability of the pH-responsive micelles prepared by direct dissolution of the 1:1 D/L mixtures of the PEG conjugated PLA-based polyelectrolytes in aqueous medium is attributed to the stereocomplex formation between PLLA and PDLA in the micellar core as confirmed by wide-angle X-ray scattering measurements.
机译:与聚乙二醇(D-PDLA-)共轭的一系列pH响应性两亲性聚(N,N-二甲基氨基乙基甲基丙烯酸酯)-嵌段-聚(d-乳酸)-嵌段-聚(N,N-二甲基氨基乙基甲基丙烯酸酯) D @ PEG和D-PLLA-D @ PEG共聚物的合成是通过开环聚合和原子转移自由基聚合的组合,然后依次进行PDMAEMA链的季铵化和叠氮基-炔烃与炔烃末端PEG的点击反应。凝胶渗透色谱法,核磁共振法和傅立叶变换红外光谱法的结果证明了该共聚物的成功合成,并且该共聚物中共轭PEG的百分含量可以通过季铵化反应中的进料比来调节。将PEG结合到PDMAEMA片段上也成功地促进了D-PDLA-D @ PEG,D-PLLA-D @ PEG及其对应的1:1 D / L混合物以所需浓度范围直接溶解于水溶液中,而无需使用与没有PEG共轭的共聚物不同的是任何有机溶剂(D-PDLA-D和D-PLLA-D)。我们通过三种不同的制备途径证明了对胶束大小,电荷和稳定性的控制,即溶液的pH值,共聚物中PEG缀合的百分比以及在胶束核心中形成PLA立体复合物。静态和动态光散射研究表明,当溶液pH降低时,由于PDMAEMA片段的质子化会导致胶束内的渗透压增加,直到胶束达到最大尺寸,核-壳胶束的尺寸会增加。有趣的是,与由单个D或D形成的胶束相比,由1:1 D / L混合物形成的胶束具有较大的溶胀率以及聚集数和流体动力学半径,它们分别随pH和稀释而无明显变化。 L形式的共聚物。通过将PEG共轭的PLA基聚电解质的1:1 D / L混合物直接溶解在水性介质中而制备的pH响应胶束具有更高的稳定性,这归因于胶束核心中PLLA和PDLA之间的立体络合物形成。广角X射线散射测量。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号