...
首页> 外文期刊>Langmuir: The ACS Journal of Surfaces and Colloids >Wetting on Fractal Superhydrophobic Surfaces from 'Core-Shell' Particles: A Comparison of Theory and Experiment
【24h】

Wetting on Fractal Superhydrophobic Surfaces from 'Core-Shell' Particles: A Comparison of Theory and Experiment

机译:从“核壳”颗粒润湿分形超疏水表面:理论与实验的比较

获取原文
获取原文并翻译 | 示例

摘要

We report an experimental and theoretical investigation of the wetting behavior of different model polar and nonpolar liquids and their mixtures on superhydrophobic fractal surfaces made of polymer- or silane-coated "core-shell" particles. We compared the experimental results with the theoretical predictions made according to the theories of Onda-Shibuichi (describes wetting on fractal surfaces) and Cassie-Baxter (describes wetting on generic rough composite surfaces). We found that the experimental findings deviate from the behavior predicted by the Onda-Shibuichi model. On the other hand, the wetting properties were found to be close to the predictions made by the Cassie-Baxter model in the hydrophobic region (the intrinsic contact angle on the flat surface is larger than 90 degrees). However, the wetting behavior in the hydrophilic region (the intrinsic contact angle is less than 90 degrees) could not be described by the Onda-Shibuichi or Cassie-Baxter model. The observed inconsistency between the experimental results and theoretical predictions was explained by the formation of metastable states of a liquid droplet on a fabricated fractal surface according to the theory developed by Johnson and Dettre for generic rough surfaces. The entrapments of the liquid droplets in metastable states resulted in superhydrophobic behavior on fractal surfaces as well, made from nonfluorinated material such as polystyrene with a surface free energy of about 30 mJ/m(2). This finding is very promising for real industrial applications where fluorinated compounds are willing to be reduced. It can be concluded that employing a texture with fractal geometry is necessary for the design of superhydrophobic coatings. Thereby, extremely lowering the surface free energy of materials by fluorination is not an obligatory factor for the generation of liquid-repellent superhydrophobic materials. We believe that the results we presented in the paper give new insight into the understanding of wetting not only on general superhydrophobic rough surfaces but also on fractal surfaces.
机译:我们报告了不同模型的极性和非极性液体及其混合物在由聚合物或硅烷包覆的“核-壳”颗粒制成的超疏水分形表面上的润湿行为的实验和理论研究。我们将实验结果与根据Onda-Shibuichi(描述了分形表面的润湿)和Cassie-Baxter(描述了普通粗糙复合材料表面的润湿)的理论做出的理论预测进行了比较。我们发现实验结果与Onda-Shibuichi模型所预测的行为有所出入。另一方面,发现在疏水区域(平坦表面上的固有接触角大于90度),润湿性能接近由Cassie-Baxter模型做出的预测。但是,Onda-Shibuichi或Cassie-Baxter模型无法描述亲水区域(固有接触角小于90度)的润湿行为。根据约翰逊和德特勒针对一般粗糙表面开发的理论,通过在制造的分形表面上形成液滴的亚稳态,可以解释实验结果与理论预测之间的不一致。液滴在亚稳状态下的截留也会在分形表面上产生超疏水行为,该分形表面由非氟化材料(例如聚苯乙烯)制成,其表面自由能约为30 mJ / m(2)。这一发现对于实际的工业应用是非常有希望的,其中氟化物愿意被还原。可以得出结论,对于超疏水性涂层的设计,必须采用具有分形几何形状的纹理。因此,通过氟化作用极大地降低材料的表面自由能并不是产生斥液性超疏水材料的必然因素。我们相信,我们在本文中提出的结果不仅为在一般超疏水粗糙表面上而且在分形表面上润湿的理解提供了新的见识。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号