首页> 外文期刊>Analytical and bioanalytical chemistry >Determination of the surface density of polyethylene glycol on gold nanoparticles by use of microscale thermogravimetric analysis
【24h】

Determination of the surface density of polyethylene glycol on gold nanoparticles by use of microscale thermogravimetric analysis

机译:微型热重分析法测定金纳米颗粒上聚乙二醇的表面密度

获取原文
获取原文并翻译 | 示例
           

摘要

The widespread integration of nanoparticle technologies into biomedicine will depend on the ability to repeatedly create particles with well-defined properties and predictable behaviors. For this to happen, fast, reliable, inexpensive, and widely available techniques to characterize nanomaterials are needed. Characterization of the surface molecules is particularly important since the surface, including the surface molecule density, plays a dominant role in determining how nanoparticles interact with their surroundings. Here, 10 and 30 nm gold nanoparticle NIST Standard Reference Materials were functionalized with fluorescently labeled polyethylene glycol (PEG) with either thiolate or lipoic acid anchoring groups to evaluate analytical techniques for determining surface coverage. The coating of the nanoparticles was confirmed with dynamic light scattering, microscale thermogravimetric analysis (mu-TGA), and ultraviolet-visible (UV-vis) spectroscopy. A UV-vis method for determining gold nanoparticle concentrations that takes into account spectral broadening upon functionalization was developed. The amount of bound PEG was quantified with mu-TGA, a technique analogous to thermogravimetric analysis that uses quartz crystal microbalances, and fluorescence spectroscopy of displaced ligands. It is shown that mu-TGA is a convenient technique for the quantification of ligands bound to inorganic particles while sacrificing a minimal amount of sample, and the treatment of the functionalized nanoparticle dispersions with dithiothreitol may be insufficient to achieve complete displacement of the surface ligands for quantification by fluorescence measurements. The mu-TGA and fluorescence results were used to determine ligand footprint sizes-average areas occupied by each ligand on the particles' surface. The lipoic acid bound ligands had footprint sizes of 0.21 and 0.25 nm(2) on 10 and 30 nm particles, respectively while the thiolate ligands had footprint sizes of 0.085 and 0.18 nm(2).
机译:纳米粒子技术在生物医学中的广泛整合将取决于能否重复产生具有明确定义的特性和可预测行为的粒子。为此,需要快速,可靠,便宜且广泛可用的表征纳米材料的技术。表面分子的表征特别重要,因为包括表面分子密度在内的表面在决定纳米粒子如何与其周围环境相互作用方面起着主导作用。在这里,将10和30 nm金纳米粒子NIST标准参考材料用带有硫醇盐或硫辛酸锚定基团的荧光标记聚乙二醇(PEG)进行功能化,以评估用于确定表面覆盖率的分析技术。通过动态光散射,微型热重分析(mu-TGA)和紫外可见光谱(UV-vis)确认了纳米颗粒的涂层。开发了一种在确定功能时考虑光谱加宽的用于确定金纳米粒子浓度的UV-vis方法。结合的PEG的量用mu-TGA进行定量,这是一种类似于热重量分析的技术,该技术使用石英晶体微量天平和置换配体的荧光光谱。结果表明,mu-TGA是一种方便的技术,可定量分析与无机颗粒结合的配体,同时牺牲少量样品,并且用二硫苏糖醇对官能化的纳米颗粒分散体进行处理可能不足以完全取代表面配体。通过荧光测量定量。 mu-TGA和荧光结果被用于确定配体足迹尺寸-颗粒表面上每个配体所占据的平均面积。硫辛酸结合的配体在10和30 nm的颗粒上的足迹尺寸分别为0.21和0.25 nm(2),而硫醇盐配体的足迹尺寸为0.085和0.18 nm(2)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号