首页> 外文期刊>Analytical chemistry >Single Droplet Separations and Surface Partition Coefficient Measurements Using Laser Ablation Mass Spectrometry
【24h】

Single Droplet Separations and Surface Partition Coefficient Measurements Using Laser Ablation Mass Spectrometry

机译:使用激光烧蚀质谱法进行单液滴分离和表面分配系数测量

获取原文
获取原文并翻译 | 示例
       

摘要

Surface activity of analytes plays a significant role in many chemical and physical phenomena. We present here a mass spectrometric method to characterize surface activity and solute partitioning between bulk liquid and the gas-liquid interface in droplets. The approach employs ablation by an infrared (IR) laser from the surface of a microliter droplet deposited on a stainless steel post. The ablated material is ionized for mass spectrometric analysis by either droplet charging or by postionization in an electrospray plume. Three areas of application have been explored using this method (1) separations in a single droplet: continuous ablation by a series of many successive laser pulses results in faster depletion of more surface active analytes, effectively comprising a surface activity-based separation. (2) Partition coefficient measurements: droplet volume is held constant during ablation by continually replenishing lost solvent. This leads to analyte-specific ion signal decay curves that may be fitted to a model based on Langmuir adsorption isotherms and simple analytical expressions, yielding quantitative values for the analyte surface partition coefficients. (3) Studies of the relationship between surface partitioning and high-performance liquid chromatography (HPLC) phase partitioning: comparisons of surface activities measured by laser desorption with retention times in reversed-phase HPLC reveal that the relationship between the two partitioning processes is very sensitive to chemical structure. Poor correlation between the retention time and surface activity is also observed within a subcategory of analytes (peptides). This effect is attributed to multimodal solute-stationary phase interactions. The laser desorption approach presented here provides direct information on analyte surface activities free from the complications encountered in chromatographic methods due to chemical structure variations.
机译:分析物的表面活性在许多化学和物理现象中起着重要作用。我们在这里提出一种质谱方法来表征表面活性和散装液体与液滴中气液界面之间的溶质分配。该方法采用红外(IR)激光从沉积在不锈钢柱上的微升液滴表面进行烧蚀。通过液滴充电或通过电喷雾羽流中的后离子化将烧蚀的材料离子化以进行质谱分析。使用此方法已探索了三个应用领域(1)在单个液滴中进行分离:通过一系列许多连续的激光脉冲进行的连续烧蚀导致更快地消耗更多的表面活性分析物,从而有效地包括了基于表面活性的分离。 (2)分配系数测量:在消融过程中,液滴体积通过不断补充损失的溶剂而保持恒定。这会导致特定于分析物的离子信号衰减曲线,该曲线可以拟合到基于Langmuir吸附等温线和简单分析表达式的模型,从而得出分析物表面分配系数的定量值。 (3)表面分配与高效液相色谱(HPLC)相分配之间关系的研究:通过激光解吸测量的表面活性与反相HPLC中的保留时间的比较表明,两个分配过程之间的关系非常敏感化学结构。在分析物(肽)的一个子类别中,还观察到了保留时间和表面活性之间的不良关联。该效应归因于多峰溶质-固定相相互作用。此处介绍的激光解吸方法可提供有关分析物表面活性的直接信息,而不会因化学结构变化而在色谱方法中遇到麻烦。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号