...
首页> 外文期刊>Carbon: An International Journal Sponsored by the American Carbon Society >Efficient metal-free N-doped mesoporous carbon catalysts for ORR by a template-free approach
【24h】

Efficient metal-free N-doped mesoporous carbon catalysts for ORR by a template-free approach

机译:通过无模板方法对ORR进行高效无金属掺杂N的介孔碳催化剂

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

A simple, cost-effective and scalable approach for the synthesis of N-doped mesoporous carbons that are effective as ORR catalysts is reported. The synthesis procedure involves two steps: a) production of mesoporous carbons using a template-free approach based on the carbonization of citrate salts of zinc and calcium, and b) N-doping by heat treatment in the presence of melamine. The resulting N-doped carbon possess a high specific surface area, a porosity made up exclusively of mesopores and a large amount of nitrogen functionalities (similar to 8-9 wt%). When used as an electrocatalyst for the oxygen reduction reaction (ORR), the metal-free carbon materials predominantly catalyze the 4 e(-) process, with an onset potential of 0.9 V (vs. RHE) and a superior kinetic current density (similar to 17 mA cm(-2)) to that of Pt/C at similar to 0.6 V under basic conditions. In addition, the developed catalysts show a higher stability than commercial Pt/C and excellent electrocatalytic selectivity against methanol crossover. (C) 2016 Elsevier Ltd. All rights reserved.
机译:报道了一种简单,成本有效且可扩展的方法,该方法可合成有效用作ORR催化剂的N掺杂介孔碳。合成过程包括两个步骤:a)基于锌和钙的柠檬酸盐的碳化,使用无模板方法生产中孔碳,以及b)在三聚氰胺存在下通过热处理进行N掺杂。所得的N掺杂的碳具有高的比表面积,仅由中孔构成的孔隙率和大量的氮官能度(约8-9重量%)。当用作氧还原反应(ORR)的电催化剂时,不含金属的碳材料主要催化4 e(-)过程,起始电势为0.9 V(vs. RHE),动能密度更高(相似至17 mA cm(-2))到Pt / C在基本条件下类似于0.6 V的电压。此外,已开发的催化剂显示出比市售Pt / C更高的稳定性,并且对甲醇穿透反应具有出色的电催化选择性。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号