首页> 外文期刊>Известия высших учебных заведений. Химия и химичесκая технология >SYNTHESIS OF N,N'-BIS(BENZOYL) DODECANEDIOIC ACID DIHYDRAZIDE AND EFFECT ON NUCLEATION AND MECHANICAL PROPERTIES OF POLY(L-LACTIC ACID)
【24h】

SYNTHESIS OF N,N'-BIS(BENZOYL) DODECANEDIOIC ACID DIHYDRAZIDE AND EFFECT ON NUCLEATION AND MECHANICAL PROPERTIES OF POLY(L-LACTIC ACID)

机译:N,N'-双(苯甲酰基)十二烷二酸二氢叠氮化物的合成及其对聚(L-乳酸)成核和力学性能的影响

获取原文
获取原文并翻译 | 示例
           

摘要

N,N'-Bis(benzoyl) dodecanedioic acid dihydrazide (NA) was synthesized by a advanced routes, and the structure of N A had been confirmed by FT-IR, ~1H NMR. The influence of the NA to nucleation and mechanical properties of Poly(L-lactic acid)(PLLA) were investigated. Compared to the neat PLIA, with the addition of 0.8% NA, the crystallization temperature (T_o) increase from 105.88 °C to 125.07 °C and the crystallization enthalpy (△H_c) increase from 1.379 to 29.17 at a cooling rate of 1 °C/min from melt. The low content of NA can increase the mechanical properties of PLLA. Upon addition of 0.5%NA, comparing with the neat PLLA, the tensile strength modulus and elongations at break increase from 74.4 MPa, 3592,8 MPa and 2.72% to 85.3 Mpa, 4266.2 Mpa and 2.98%, respectively. And the impact strength possesses a maximum value for the critical NA loading 1%.
机译:N,N'-双(苯甲酰基)十二烷二酸二酰肼(NA)是通过先进的路线合成的,NA的结构已通过FT-IR,〜1H NMR确认。研究了NA对聚(L-乳酸)(PLLA)成核和力学性能的影响。与纯PLIA相比,添加0.8%NA时,在1°C的冷却速率下,结晶温度(T_o)从105.88°C升高至125.07°C,结晶焓(△H_c)从1.379升高至29.17 / min融化。低含量的NA可以增加PLLA的机械性能。加入0.5%NA后,与纯PLLA相比,抗张强度模量和断裂伸长率分别从74.4 MPa,3592.8 MPa和2.72%增加到85.3 Mpa,4266.2 Mpa和2.98%。对于1%的临界NA载荷,冲击强度具有最大值。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号