首页> 外文期刊>Computers & Fluids >Numerical simulation of vortical flows in the near field of jets from notched circular nozzles
【24h】

Numerical simulation of vortical flows in the near field of jets from notched circular nozzles

机译:切口圆形喷嘴射流近场涡流的数值模拟

获取原文
获取原文并翻译 | 示例
           

摘要

The vortex dominated flows in the near field of jets from notched circular nozzles are investigated using direct numerical simulation. The nozzles studied include a normal circular nozzle, a V-shaped notched nozzle, and an A-shaped notched nozzle, all with the same circular cross-section. The vortical structures resulting from these different circular nozzles are visualized by using a numerical dye visualization technique. Results for the V-shaped notched nozzle are compared with available experimental measurements using laser-induced fluorescence techniques. In addition to azimuthal vortex rings created because of the shear-layer between the jet and the ambient fluid, the computations also reveal streamwise vortex pairs both inside and outside the vortex rings that spread outward as the vortex rings move downstream. Comparisons of the three different nozzles show that, unlike in the case of the circular nozzle where the streamwise vortex pairs emerge evenly along the nozzle lip, streamwise vortex pairs for the notched circular nozzles are produced only at peak and trough locations. Analysis of the mixing characteristics of the three types of nozzles shows that the notches in the nozzle exit significantly enhance jet mixing.
机译:使用直接数值模拟研究了带切口圆形喷嘴的射流近场中的旋涡主导流。所研究的喷嘴包括普通圆形喷嘴,V形缺口喷嘴和A形缺口喷嘴,它们均具有相同的圆形横截面。通过使用数字染料可视化技术,可以将这些不同的圆形喷嘴产生的旋涡结构可视化。使用激光诱导的荧光技术,将V形切口喷嘴的结果与可用的实验测量结果进行比较。除了由于射流和环境流体之间的剪切层而产生的方位涡旋环外,计算还揭示了涡旋环内部和外部的流向涡旋对,随着涡旋环向下游移动,涡流对向外扩散。三种不同喷嘴的比较表明,与圆形喷嘴沿喷嘴唇缘均匀出现流向涡流的情况不同,带槽口圆形喷嘴的流向涡流仅在峰谷位置形成。对三种类型喷嘴的混合特性的分析表明,喷嘴出口的槽口显着增强了喷射混合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号