首页> 外文期刊>Diabetes technology & therapeutics >Effect of steel and teflon infusion catheters on subcutaneous adipose tissue blood flow and infusion counter pressure in humans.
【24h】

Effect of steel and teflon infusion catheters on subcutaneous adipose tissue blood flow and infusion counter pressure in humans.

机译:钢和聚四氟乙烯输液导管对人体皮下脂肪组织血流和输注反压的影响。

获取原文
获取原文并翻译 | 示例
           

摘要

BACKGROUND: Subcutaneous tissue is an important target for drug deposition or infusion. A local trauma may induce alterations in local microcirculation and diffusion barriers with consequences for drug bioavailability. We examined the influence of infusion catheters' wear time on local microcirculation and infusion counter pressure. METHODS: One steel catheter and one Teflon (Dupont, Wilmington, DE) catheter were inserted in subcutaneous, abdominal adipose tissue (SCAAT) in 10 healthy, lean men. The catheters were infused with isotonic saline at a rate of 10 microL/h for 48 h. Another steel catheter and a Teflon catheter were inserted contralateral to the previous catheters after 48 h. The infusion counter pressure was measured during a basal infusion rate followed by a bolus infusion. The measurements during a basal rate infusion were repeated after the bolus infusion. Adipose tissue blood flow (ATBF) was measured in SCAAT continuously. RESULTS: A significant increase in ATBF was observed with wear time for Teflon but not for steel catheters. Mean infusion pressure during the bolus phase increased significantly from 0 to 48 h for Teflon but not for steel catheters. ATBF and infusion counter pressure was similar between Teflon and steel catheters after acute catheter implantation and after wear time of 48 h. The maximum value of pressure during the bolus phase increased with wear time of a catheter. CONCLUSIONS: ATBF and bolus mean infusion pressure increased significantly with a wear time of 48 h in Teflon but not in steel catheters. The maximal pressure required to deliver a bolus infusion increased with wear time of a catheter. A higher maximal pressure was required to deliver a bolus infusion through a Teflon than through a steel catheter. We propose that the difference in infusion counter pressure and ATBF between Teflon and steel catheters with wear time may be explained by better biocompatibility of steel than Teflon.
机译:背景:皮下组织是药​​物沉积或输注的重要靶标。局部创伤可能会引起局部微循环和扩散障碍的改变,从而影响药物的生物利用度。我们检查了输液导管的磨损时间对局部微循环和输液反压的影响。方法:将一根钢导管和一根特富龙(Dupont,Wilmington,DE)导管插入10例健康的瘦人的皮下腹部脂肪组织(SCAAT)中。导管以10微升/小时的速度注入等渗盐水48小时。 48小时后,将另一条钢导管和一条Teflon导管与先前的导管对侧插入。在基础输注速率,然后大剂量输注期间,测量输注反压力。在大剂量输注之后重复进行基础速率输注期间的测量。在SCAAT中连续测量脂肪组织血流量(ATBF)。结果:随着铁氟龙的磨损时间的增加,ATBF显着增加,而钢导管则没有。对于聚四氟乙烯,推注阶段的平均输注压力从0到48小时显着增加,但对于钢制导管则没有。铁氟龙和钢导管在急性导管植入后和磨损时间48小时后的ATBF和输注反压相似。推注阶段压力的最大值随导管的磨损时间而增加。结论:Teflon的磨损时间为48 h时,ATBF和推注平均输注压力显着增加,而钢导管则没有。推注输注所需的最大压力随导管的磨损时间而增加。与通过钢导管相比,通过特氟龙进行大剂量输注需要更高的最大压力。我们建议,铁氟龙和钢导管之间的输注反压和ATBF随磨损时间的差异可以用比铁氟龙更好的钢生物相容性来解释。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号