...
首页> 外文期刊>Journal of Sound and Vibration >Free vibrations of laminated composite shells with uniformly distributed attached mass using higher order shell theory including stiffness effect
【24h】

Free vibrations of laminated composite shells with uniformly distributed attached mass using higher order shell theory including stiffness effect

机译:使用包括刚度效应的高阶壳理论,具有均匀分布附着质量的层压复合壳的自由振动

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, free vibrations of a cross-ply composite shell with or without a uniformly distributed attached mass are analyzed using higher order shell theory. The results of free vibrations without distributed attached mass are validated by previous literatures. The stiffness effect of this distributed attached mass are also considered and compared with those well-known published results in which this effect is ignored. Various results for composite shells under a variety of conditions such as variations in the thickness of the shell, variation in the thickness of the distributed attached mass, variation in the radii of curvatures and various elasticity moduli are presented in this paper. In some cases, to verify the novel results, first-order shear deformation theory (FSDT) is also used. In this paper, parameters which influence the natural frequencies of the shells with attached mass including the stiffness of the mass are investigated. Parameters which are investigated in this paper are thickness of the shell, thickness of the distributed attached mass, elasticity moduli of the distributed attached mass and radius of curvatures of shells. Increasing the thickness or elasticity moduli of the distributed attached mass will increase the fundamental natural frequency of the shell. The effect of the stiffness of the distributed attached mass is decreased by decreasing the radii of curvatures or increasing the thickness of the shells.
机译:在本文中,使用高阶壳理论分析具有或不具有均匀分布的附着质量的交叉复合材料壳的自由振动。没有分布的附着质量的自由振动的结果已被先前的文献证实。还考虑了这种分布的附着质量的刚度效应,并将其与忽略该效应的那些众所周知的公开结果进行了比较。本文介绍了复合壳在各种条件下的各种结果,例如壳的厚度变化,附着质量分布的厚度变化,曲率半径的变化以及各种弹性模量。在某些情况下,为验证新结果,还使用了一阶剪切变形理论(FSDT)。在本文中,研究了影响附有质量的壳的固有频率(包括质量的刚度)的参数。本文研究的参数是壳体的厚度,分布的附着质量的厚度,分布的附着质量的弹性模量和壳的曲率半径。增加分布的附着质量的厚度或弹性模量将增加壳的基本固有频率。通过减小曲率半径或增加壳的厚度,可以减小分配的附着质量的刚度的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号