...
首页> 外文期刊>Journal of Polymer Science, Part B. Polymer Physics >Shear-enhanced crystallization of a thermoplastic polyimide derived from 3,3 ',4,4 '-oxydiphthalic dianhydride and 4,4 '-oxydianiline
【24h】

Shear-enhanced crystallization of a thermoplastic polyimide derived from 3,3 ',4,4 '-oxydiphthalic dianhydride and 4,4 '-oxydianiline

机译:衍生自3,3',4,4'-氧二邻苯二甲酸二酐和4,4'-氧二苯胺的热塑性聚酰亚胺的剪切增强结晶

获取原文
获取原文并翻译 | 示例
           

摘要

The aim of this work is to investigate the effect of consecutive shear on the crystallization of an amorphous aromatic polyimide (PI) derived from 3,3',4,4'oxydiphthalic dianhydride (3,3',4,4'-ODPA) and 4,4-oxydianiline (ODA). At 260 degrees C, the increase of shear rate or shear time leads to the increase of crystallinity. Indeed, increasing shear rate can also accelerate the crystallization behavior. Moreover, it was found that a new melting peak appeared at higher temperature for long time or high rate sheared sample. The enhancement of crystallization behavior appears directly linked to the increase of crystal thickness. Particularly, the effect of shear temperature was investigated, and the results revealed that the crystallization of the PI was more sensitive to shear at 260 degrees C, which was 10 degrees above the glass transition temperature (250 degrees C) of the PI. Possible mechanism was proposed to illustrate the effect of consecutive shear on the crystallization of the PI polymer. (c) 2007 Wiley Periodicals, Inc.
机译:这项工作的目的是研究连续剪切对衍生自3,3',4,4'氧二邻苯二甲酸二酐(3,3',4,4'-ODPA)的无定形芳族聚酰亚胺(PI)结晶的影响和4,4-氧二苯胺(ODA)。在260℃下,剪切速率或剪切时间的增加导致结晶度的增加。确实,增加剪切速率也可以加速结晶行为。此外,发现在较高温度下长时间或高剪切速率样品中出现新的熔融峰。结晶行为的增强似乎与晶体厚度的增加直接相关。尤其是,研究了剪切温度的影响,结果表明PI的结晶对260摄氏度的剪切更敏感,这比PI的玻璃化转变温度(250摄氏度)高10摄氏度。提出了可能的机理来说明连续剪切对PI聚合物结晶的影响。 (c)2007年Wiley Periodicals,Inc.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号