...
首页> 外文期刊>Journal of Physical and Chemical Reference Data >Reference Data for the Density and Viscosity of Liquid Cadmium, Cobalt, Gallium, Indium, Mercury, Silicon, Thallium, and Zinc
【24h】

Reference Data for the Density and Viscosity of Liquid Cadmium, Cobalt, Gallium, Indium, Mercury, Silicon, Thallium, and Zinc

机译:液态镉,钴,镓,铟,铟,汞,硅,T和锌的密度和粘度的参考数据

获取原文
获取原文并翻译 | 示例
           

摘要

The available experimental data for the density and viscosity of liquid cadmium, cobalt, gallium, indium, mercury, silicon, thallium, and zinc have been critically examined with the intention of establishing both a density and a viscosity standard. All experimental data have been categorized into primary and secondary data according to the quality of measurement, the technique employed and the presentation of the data, as specified by a series of criteria. The proposed standard reference correlations for the density of liquid cadmium, cobalt, gallium, indium, silicon, thallium, and zinc are characterized by percent deviations at the 95% confidence level of 0.6, 2.1, 0.4, 0.5, 2.2, 0.9, and 0.7, respectively. In the case of mercury, since density reference values already exist, no further work was carried out. The standard reference correlations for the viscosity of liquid cadmium, cobalt, gallium, indium, mercury, silicon, thallium, and zinc are characterized by percent deviations at the 95% confidence level of 9.4, 14.0, 13.5, 2.1, 7.3, 15.7, 5.1, and 9.3, respectively.
机译:为了确定密度和粘度标准,已经严格检查了液态镉,钴,镓,铟,汞,硅,th和锌的密度和粘度的可用实验数据。根据一系列标准指定的测量质量,所用技术和数据表示方式,所有实验数据都已分为主要和次要数据。液态镉,钴,镓,铟,硅,th和锌的密度的拟议标准参考相关性通过在95%置信度水平为0.6、2.1、0.4、0.5、2.2、0.9和0.7时的百分比偏差来表征, 分别。对于汞,由于已经存在密度参考值,因此不再进行任何工作。液态镉,钴,镓,铟,汞,硅,th和锌的粘度的标准参考相关性通过在95%置信度水平9.4、14.0、13.5、2.1、7.3、15.7、5.1下的百分比偏差来表征和9.3。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号