首页> 外文期刊>Journal of Nuclear Materials: Materials Aspects of Fission and Fusion >Role of alpha(2)/gamma and gamma/gamma phase boundaries in cavity formation in a TiAl intermetallic compound irradiated with He-ions
【24h】

Role of alpha(2)/gamma and gamma/gamma phase boundaries in cavity formation in a TiAl intermetallic compound irradiated with He-ions

机译:Al(2)/γ和γ/γ相界在He离子辐照的TiAl金属间化合物中的空穴形成中的作用

获取原文
获取原文并翻译 | 示例
           

摘要

A Ti-48at.%Al intermetallic compound has been irradiated with 200 keV Pie-ions at 623 and 773 K. The helium cavity density decreases with decreasing alpha (2) and gamma lamella width. A plot of the cavity density and lamella width reveals a linear relationship after irradiation to 15 dpa. Cavity density in regions with 300 nm wide lamella is about half of that in large gamma grains of the specimen. The alpha (2)/gamma lamellar boundaries supply a preferential nucleation site for cavities. Although the cavities are also formed on the gamma/gamma lamellar boundaries, the nucleation is limited to misfit dislocations on the boundaries. Defect-free zones are in the regions of about 50 nm width immediately adjacent to the lamellar boundaries at 773 K. These results suggest that the lamellar boundaries are effective sinks for radiation defects and contribute to the suppression of radiation-induced defect cluster development in TiAl alloys. (C) 2000 Elsevier Science B.V. All rights reserved. [References: 10]
机译:Ti-48at。%Al金属间化合物已在623和773 K下用200 keV Pie离子辐照。氦腔密度随着α(2)和γ薄片宽度的减小而降低。腔密度和薄片宽度的曲线图显示了辐照至15 dpa后的线性关系。薄片厚度为300 nm的区域的腔密度大约是标本的大伽马晶粒的腔密度的一半。 α(2)/γ层状边界为空洞提供了优先的形核位置。尽管在γ/γ层状边界上也形成了空洞,但成核作用仅限于边界上的错配位错。无缺陷区位于紧邻773 K的层状边界的大约50 nm宽度的区域中。这些结果表明,层状边界是有效的辐射缺陷汇,并有助于抑制TiAl中由辐射引起的缺陷簇发展合金。 (C)2000 Elsevier Science B.V.保留所有权利。 [参考:10]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号