首页> 外文期刊>Journal of orthopaedic trauma >Rotationally Stable Screw-Anchor With Locked Trochanteric Stabilizing Plate Versus Proximal Femoral Nail Antirotation in the Treatment of AO/OTA 31A2.2 Fracture: A Biomechanical Evaluation
【24h】

Rotationally Stable Screw-Anchor With Locked Trochanteric Stabilizing Plate Versus Proximal Femoral Nail Antirotation in the Treatment of AO/OTA 31A2.2 Fracture: A Biomechanical Evaluation

机译:旋转稳定的带固定转子固定板的螺钉锚钉与股骨近端钉抗旋转术治疗AO / OTA 31A2.2骨折:生物力学评估

获取原文
获取原文并翻译 | 示例
           

摘要

Objectives:Third-generation cephalomedullary nails currently represent the gold standard in the treatment of unstable trochanteric femur fractures. Recently, an extramedullary rotationally stable screw-anchor system (RoSA) has been developed. It was designed to combine the benefits of screw and blade and to improve stability using a locked trochanteric stabilizing plate (TSP). The purpose of this study was to compare the biomechanical behavior of RoSA/TSP and the proximal femoral nail antirotation (PFNA).Methods:Standardized AO/OTA 31A2.2 fractures were induced by an oscillating saw in 10 paired human specimens (n = 20; mean age = 85 years; range: 71-96 years). The fractures were stabilized by either the RoSA/TSP (Koenigsee Implants, Allendorf, Germany) or the PFNA (DePuy Synthes, Zuchwil, Switzerland). Femurs were positioned in 25 degrees of adduction and 10 degrees of posterior flexion and were cyclically loaded with axial sinusoidal pattern at 0.5 Hz, starting at 300 N, with stepwise increase by 300 N every 500 cycles until bone-implant failure occurred. After every load step, the samples were measured visually and radiographically. Femoral head migration was assessed.Results:The stiffness at the load up to the clinically relevant load step of 1800 N (639 378 N/mm (RoSA/TSP) vs. 673 +/- 227 N/mm (PFNA); P = 0.542) was comparable, as was the failure load (3000 +/- 787 N vs. 3780 +/- 874 N; P = 0.059). Up to 1800 N, no femoral head rotation, head migration, or femoral neck shortening were observed either for RoSA/TSP or PFNA. Whereas failure of the PFNA subsumed fractures of the greater trochanter and the lateral wall, a posterior femoral neck fracture with a significantly increased femoral neck shortening (1.7 mm vs. 0 mm; P = 0.012) was the cause of failure with RoSA/TSP. This specific kind of failure was induced by a femoral neck weakening caused by the posterior TSP stabilizing screw.Conclusions:There was no significant difference in biomechanical properties between the RoSA/TSP and the PFNA for the fracture pattern tested. However, failure modes differed between the 2 implants with greater femoral neck shortening observed in the RoSA/TSP group.
机译:目的:第三代头颅髓内钉目前是治疗不稳定的股骨转子粗隆骨折的金标准。近来,已经开发了髓外旋转稳定的螺钉锚固系统(RoSA)。它的设计目的是结合螺钉和刀片的优点,并使用锁定的转子转子稳定板(TSP)来提高稳定性。这项研究的目的是比较RoSA / TSP和股骨近端抗旋转(PFNA)的生物力学行为。方法:用振动锯在10对成对的人类标本中诱发标准化的AO / OTA 31A2.2骨折(n = 20)。 ;平均年龄= 85岁;范围:71-96岁)。 RoSA / TSP(德国阿伦多夫的Koenigsee植入物)或PFNA(瑞士祖克维尔的DePuy Synthes)可稳定骨折。股骨置于内收25度和后屈10度,并以0.5 Hz的频率从300 N开始周期性地加载轴向正弦曲线,然后每500个周期逐步增加300 N,直到发生骨植入失败。在每个加载步骤之后,目测和射线照相测量样品。结果:直至临床相关负荷步长的负荷刚度为1800 N(639 378 N / mm(RoSA / TSP)与673 +/- 227 N / mm(PFNA); P = 0.542)是可比较的,失效载荷也是如此(3000 +/- 787 N与3780 +/- 874 N; P = 0.059)。高达1800 N,对于RoSA / TSP或PFNA,均未观察到股骨头旋转,头部移位或股骨颈缩短。 PFNA的失败归因于大转子和侧壁的骨折,而股骨颈后段骨折和股骨颈缩短明显增加(1.7 mm vs. 0 mm; P = 0.012)是RoSA / TSP失败的原因。这种特定类型的衰竭是由TSP后固定螺钉引起的股骨颈弱化引起的。结论:RoSA / TSP和PFNA的生物力学性能在骨折模式上没有显着差异。然而,在RoSA / TSP组中观察到的2种植入物的失败模式不同,股骨颈缩短更大。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号