...
首页> 外文期刊>Journal of Microscopy >Evidence of multimicrometric coherent gamma ' precipitates in a hot-forged gamma '-gamma ' nickel-based superalloy
【24h】

Evidence of multimicrometric coherent gamma ' precipitates in a hot-forged gamma '-gamma ' nickel-based superalloy

机译:热锻造γ-γ镍基高温合金中多微米相干γ沉淀的证据

获取原文
获取原文并翻译 | 示例
           

摘要

This paper demonstrates the existence of large ' precipitates (several micrometres in diameter) that are coherent with their surrounding matrix grain in a commercial -' nickel-based superalloy. The use of combined energy dispersive X-ray spectrometry and electron backscattered diffraction (EBSD) analyses allowed for revealing that surprising feature, which was then confirmed by transmission electron microscopy (TEM). Coherency for such large second-phase particles is supported by a very low crystal lattice misfit between the two phases, which was confirmed thanks to X-ray diffractograms and TEM selected area electron diffraction patterns. Dynamic recrystallization of polycrystalline -' nickel-based superalloys has been extensively studied in terms of mechanisms and kinetics. As in many materials with low stacking fault energy, under forging conditions, the main softening mechanism is discontinuous dynamic recrystallization. This mechanism occurs with preferential nucleation on the grain boundaries of the deformed matrix. The latter is then being consumed by the growth of the newly formed grains of low energy and by nucleation that keeps generating new grains. In the case of sub-solvus forging, large ' particles usually pin the migrating boundaries and thus limit grain growth to a size which is determined by the distribution of second-phase particles, in good agreement with the Smith-Zener model. Under particular circumstances, the driving force associated with the difference in stored energy between the growing grains and the matrix can be large enough that the pinning forces can be overcome, and some grains can then reach much larger grain sizes. In the latter exceptional case, some intragranular primary ' particles can be observed, although they are almost exclusively located on grain boundaries and triple junctions otherwise. In both cases, primary precipitates have no special orientation relationship with the surrounding matrix grain(s). This paper demonstrates the existence of high fractions of large ' precipitate (several micrometres in diameter) that are coherent with their surrounding matrix grain, in a commercial -' nickel-based superalloy. Such a configuration is very surprising, because there is apparently no reason for the coherency of such particles.
机译:本文证明了在大型的“镍基高温合金”中存在与周围的基体晶粒连贯的大的“析出物”(直径为几微米)。结合使用能量色散X射线光谱法和电子背散射衍射(EBSD)分析,可以揭示这一令人惊讶的特征,然后通过透射电子显微镜(TEM)对其进行了确认。如此大的第二相粒子的相干性得到了两相之间极低的晶格失配的支持,这得益于X射线衍射图和TEM选择区域电子衍射图。在机理和动力学方面,已经对多晶镍基高温合金的动态重结晶进行了广泛的研究。与许多堆垛层错能低的材料一样,在锻造条件下,主要的软化机理是不连续的动态再结晶。该机制在变形基体的晶界上优先成核而发生。后者随后被新形成的低能晶粒的生长以及不断产生新晶粒的形核所消耗。在次溶剂锻造的情况下,大的'粒子通常会限制迁移边界,从而将晶粒的生长限制在由第二相粒子的分布决定的尺寸,这与Smith-Zener模型非常吻合。在特定情况下,与生长的谷物和基体之间的储能差相关的驱动力可能足够大,从而可以克服钉扎力,然后某些谷物可以达到更大的晶粒尺寸。在后一种例外情况下,可以观察到一些晶粒内的初级粒子,尽管它们几乎完全位于晶粒边界上,否则位于三重结点上。在这两种情况下,初生沉淀物与周围的基体晶粒都没有特殊的取向关系。本文证明了在商业化的镍基高温合金中存在高比例的大型“沉淀物”(直径为几微米),这些沉淀物与其周围的基体晶粒连贯。这种构造是非常令人惊讶的,因为显然没有理由使这种颗粒具有连贯性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号