首页> 外文期刊>Journal of Materials Engineering and Performance >Effect of Al_2O_3 Content on Electrical Breakdown Properties of Al_2O_3/Cu Composite
【24h】

Effect of Al_2O_3 Content on Electrical Breakdown Properties of Al_2O_3/Cu Composite

机译:Al_2O_3含量对Al_2O_3 / Cu复合材料电击穿性能的影响

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Al_2O_3/Cu composites were prepared by external addition of Al_2O_3, and the effect of Al_2O_3 content on microstructure, density, hardness, electrical conductivity and vacuum electrical breakdown properties was studied. The results show that with increasing Al_2O_3 addition, the density of Al_2O_3/Cu composite significantly decreases, the hardness sharply increases and then slowly decreases, but the electrical conductivity invariably decreases. The vacuum breakdown test shows that with increasing Al_2O_3 addition, the break-down strength first sharply increases and then decreases when the Al_2O_3 content exceeds 1.2 wt.%; the chopping current always exhibits a decreasing trend and the arc life first increases and then decreases. According to the morphology of arc erosion and analysis, the arc erosion resistance increases and then decreases sharply. In the range of experiments, the optimal arc erosion resistance of Al_2O_3/Cu composite can be obtained with the addition of 1.2 wt.% Al_2O_3.
机译:通过外加Al_2O_3制备Al_2O_3 / Cu复合材料,研究了Al_2O_3含量对组织,密度,硬度,电导率和真空电击穿性能的影响。结果表明,随着Al_2O_3添加量的增加,Al_2O_3 / Cu复合材料的密度显着降低,硬度急剧升高,然后缓慢降低,但电导率始终降低。真空击穿试验表明,随着Al_2O_3添加量的增加,当Al_2O_3的含量超过1.2 wt。%时,击穿强度首先急剧增加,然后下降。斩波电流始终呈现下降趋势,电弧寿命先增大然后减小。根据电弧腐蚀的形态和分析,耐电弧腐蚀能力先升高后降低。在实验范围内,通过添加1.2重量%的Al_2O_3可以得到最佳的Al_2O_3 / Cu复合材料的耐电弧腐蚀性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号