...
首页> 外文期刊>Journal of Materials Science >The effects of fluid flow on secondary arm coarsening during dendritic solidification
【24h】

The effects of fluid flow on secondary arm coarsening during dendritic solidification

机译:树枝状凝固过程中流体流动对次级臂粗化的影响

获取原文
获取原文并翻译 | 示例

摘要

Although dendrites are the result of diffusion limited growth it has long been appreciated that flow within the parent melt can have a dramatic effect on these structures. A free boundary model of dendritic solidification is used to assess the effects on the secondary arm coarsening processes of fluid flow within the parent melt. It is found that for solutally controlled coarsening realistic interdendritic flow velocities of the order 10(-3)-10(-2) m s(-1) give rise to ripening rates which are comparable to diffusive transport. However, only flows with a component aligned from the secondary tip towards the root enhance the ripening rate. Oppositely aligned flows actually reduce the ripening rate. Thus, due to the four-fold symmetry of dendrites in cubic metals, the actual effect on the secondary arm spacing could be quite small. The results are shown to be in general agreement with recent microgravity experiments on dendritic coarsening. (C) 2003 Kluwer Academic Publishers. [References: 31]
机译:尽管树枝状晶体是扩散受限生长的结果,但人们早已认识到母体熔体内部的流动会对这些结构产生显着影响。树枝状凝固的自由边界模型用于评估母体熔体中流体流动对次级臂粗化过程的影响。已经发现,对于溶质控制的粗化,实际的树突间枝晶流速为10(-3)-10(-2)m s(-1)会产生与扩散传输相当的成熟速率。但是,只有成分从次生尖端向根部对齐的流才会提高成熟速率。相反对齐的流实际上会降低成熟速率。因此,由于立方金属中枝晶的四重对称性,对副臂间距的实际影响可能很小。结果表明,该结果与最近进行的树枝状粗化的微重力实验一致。 (C)2003 Kluwer学术出版社。 [参考:31]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号