首页> 外文期刊>Journal of Korean Institute of Metal and Materials >Effect of oxygen blowing under reduced pressure on decarburization reaction of ultra-low carbon steel
【24h】

Effect of oxygen blowing under reduced pressure on decarburization reaction of ultra-low carbon steel

机译:减压吹氧对超低碳钢脱碳反应的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The effect of oxygen blowing under reducedpressure on decarburization and temperature changes were studiedusing an RH vacuum degasser. The decarburization rate wasincreased from 0.17 to 0.19min-1 by oxygen blowing duringdecarburization. It was caused by the increase of effective reactionarea such as cavity and splash formed by oxygen blowing on meltsurface. The carbon content below 20ppm was obtained by oxygenblowing. An average TDR (temperature drop-rate) duringdecarburization was decreased to -0.6℃/ min by oxygen blowing.It was caused by post combustion of the carbon monoxide gasgenerated from melt decarburization in RH vacuum vessel.
机译:使用RH真空脱气机研究了减压吹氧对脱碳和温度变化的影响。在脱碳过程中通过吹氧将脱碳速率从0.17增加到0.19min-1。这是由于有效反应区域的增加,例如熔体表面吹氧引起的型腔和飞溅。通过吹氧获得低于20ppm的碳含量。通过吹氧将脱碳过程中的平均TDR(降温速率)降低至-0.6℃/ min。这是由RH真空容器中熔融脱碳产生的一氧化碳气体的后燃烧引起的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号