首页> 外文期刊>Journal of Geophysical Research. Biogeosciences >A modeling approach for upscaling gross ecosystem production to the landscape scale using remote sensing data
【24h】

A modeling approach for upscaling gross ecosystem production to the landscape scale using remote sensing data

机译:一种使用遥感数据将生态系统总产量提升到景观规模的建模方法

获取原文
获取原文并翻译 | 示例
           

摘要

Gross ecosystem production (GEP) can be estimated at the global scale and in a spatially continuous mode using models driven by remote sensing. Multiple studies have demonstrated the capability of high resolution optical remote sensing to accurately measure GEP at the leaf and stand level, but upscaling this relationship using satellite data remains challenging. Canopy structure is one of the complicating factors as it not only alters the strength of a measured signal depending on integrated leaf-angle-distribution and sun-observer geometry, but also drives the photosynthetic output and light-use-efficiency ( ) of individual leaves. This study introduces a new approach for upscaling multiangular canopy level reflectance measurements to satellite scales which takes account of canopy structure effects by using Light Detection and Ranging (LiDAR). A tower-based spectro-radiometer was used to observe canopy reflectances over an annual period under different look and solar angles. This information was then used to extract sunlit and shaded spectral end-members corresponding to minimum and maximum values of canopy- over 8-d intervals using a bidirectional reflectance distribution model. Using three-dimensional information of the canopy structure obtained from LiDAR, the canopy light regime and leaf area was modeled over a 12 km2 area and was combined with spectral end-members to derive high resolution maps of GEP. Comparison with eddy covariance data collected at the site shows that the spectrally driven model is able to accurately predict GEP (r 2 between 0.75 and 0.91, p < 0.05).
机译:使用遥感驱动的模型,可以在全球范围内以空间连续模式估算生态系统总产值。多项研究表明,高分辨率光学遥感技术能够在叶片和林分水平上准确测量GEP,但是使用卫星数据扩大这种关系仍然具有挑战性。冠层结构是复杂的因素之一,因为它不仅会根据集成的叶片角度分布和太阳观察者的几何形状改变被测信号的强度,而且还会驱动单个叶片的光合作用输出和光利用效率() 。这项研究引入了一种新方法,该方法将多角度冠层水平反射率测量结果放大到卫星比例,并考虑到了通过使用光检测和测距(LiDAR)的冠层结构效应。基于塔的分光辐射计用于观察一年中不同外观和太阳角度下的冠层反射率。然后,使用双向反射率分布模型,将该信息用于提取与8d间隔内的冠层的最小值和最大值相对应的阳光照射和阴影照射的光谱末端成员。利用从LiDAR获得的冠层结构的三维信息,在12 km2的面积上对冠层的光状况和叶片面积进行建模,并与光谱末端成员组合以得出GEP的高分辨率图。与现场收集的涡动协方差数据的比较表明,光谱驱动模型能够准确预测GEP(r 2在0.75和0.91之间,p <0.05)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号