首页> 外文期刊>Diffusion and Defect Data. Solid State Data, Part A. Defect and Diffusion Forum >Suppression of Iron Silicide Formation in the Reaction Layer of Sialon — 7.5% Cr Ferritic Steel Joint
【24h】

Suppression of Iron Silicide Formation in the Reaction Layer of Sialon — 7.5% Cr Ferritic Steel Joint

机译:Sialon-7.5%Cr铁素体钢接头反应层中硅化铁形成的抑制

获取原文
获取原文并翻译 | 示例
           

摘要

Diffusion bonding of sialon and 7.5%-Cr Ferritic Steel (FS) in as-received and nitrided condition was studied. Decomposition of sialon and interdiffusion of elements between the sialon and the steel were observed. The interdiffusion of elements produced reaction layers at the joint. The steel moved into the decomposition part of the sialon and replaced the decomposed sialon in this part. Diffusion of silicon into the steel resulted in the silicon-diffusion layer. FeSi_2 was formed in the reaction layer when Si in the decomposition part of the sialon reacted with Fe. The use of nitrided steel in the diffusion bonding had suppressed the formation of the FeSi_2 in the layer.
机译:研究了赛隆和7.5%Cr铁素体钢在原样和渗氮条件下的扩散键合。观察到赛隆的分解和元素在赛隆和钢之间的相互扩散。元素的相互扩散在接头处产生了反应层。钢移入赛隆的分解部分,并替换了该部分中已分解的赛隆。硅向钢中的扩散产生了硅扩散层。当赛隆的分解部分中的Si与Fe反应时,在反应层中形成FeSi_2。在扩散结合中使用氮化钢抑制了该层中FeSi_2的形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号