首页> 外文期刊>Journal of Fluids Engineering: Transactions of the ASME >Performance Improvement of Weis-Fogh Type Ship's Propulsion Mechanism Using a Wing Restrained by an Elastic Spring
【24h】

Performance Improvement of Weis-Fogh Type Ship's Propulsion Mechanism Using a Wing Restrained by an Elastic Spring

机译:使用弹性弹簧约束的机翼提高Weis-Fogh型船舶推进机构的性能

获取原文
获取原文并翻译 | 示例
           

摘要

This study was conducted in an attempt to improve the hydrodynamic performance of a Weis-Fogh type ship propulsion mechanism by installing a spring to the wing so that the opening angle of the wing can be changed automatically. With the prototype design, the average thrust coefficient was almost fixed with all velocity ratios; but with the spring type, the thrust coefficient was increased sharply as the velocity ratio increased. The average propulsive efficiency was higher with a bigger opening angle in the prototype but in the spring type design, the one with a smaller spring coefficient had higher efficiency. In the case of velocity ratios over 1.5 where big thrust can be generated, the spring type had more than twice the increase in propulsion efficiency compared with the prototype.
机译:进行这项研究的目的是通过在机翼上安装一个弹簧来改善Weis-Fogh型船舶推进机构的水动力性能,以便机翼的开度可以自动改变。在原型设计中,所有推力比的平均推力系数几乎是固定的。但是对于弹簧类型,推力系数随着速度比的增加而急剧增加。在原型中,开度越大,平均推进效率越高,但在弹簧型设计中,弹簧系数较小的推进效率更高。在速度比超过1.5且可以产生大推力的情况下,与原型相比,弹簧式的推进效率提高了两倍以上。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号