首页> 外文期刊>Journal of Environmental Engineering >Estimation of the maximum consumption of permanganate by aquifer solids using a modified chemical oxygen demand test
【24h】

Estimation of the maximum consumption of permanganate by aquifer solids using a modified chemical oxygen demand test

机译:使用改良的化学需氧量测试估算含水层固体中高锰酸盐的最大消耗量

获取原文
获取原文并翻译 | 示例
       

摘要

Knowledge of the consumption of permanganate by naturally occurring reduced species associated with aquifer materials is required for site screening and design purposes to support permanganate in situ chemical oxidation (ISCO) applications. It has been established that this consumption is not a singled-valued quantity, but rather is kinetically controlled. Current methods to determine this permanganate natural oxidant demand (NOD) involve the use of well-mixed batch tests, which are time consuming and subject to test variables (e.g., concentration, mass of oxidant to solid ratio, reaction duration, and mixing conditions) that significantly affect the results. In this paper, we propose a modified chemical oxygen demand (COD) test using permanganate, which can be used to determine the maximum permanganate NOD of an aquifer material. As an initial point of comparison, we tested aquifer materials collected from eight potential ISCO sites using this modified or permanganate COD method, the traditional dichromate COD method, and a method based on well-mixed batch reactors. The results from this comparison indicated that there was no statistically significant difference (alpha=5%) between the results of the permanganate COD test and the maximum NOD from the well-mixed batch reactors, while on average the dichromate COD test overestimated the maximum NOD by 100%. The permanganate COD test results were highly correlated to the batch-test maximum NOD data (r=0.996), and to the total organic carbon and amorphous Fe content of the aquifer materials (r=0.91). A limited sensitivity investigation of this proposed permanganate COD test revealed that the suspected formation of manganese oxides, a reaction byproduct, may lead to increased experimental variability. However, in spite of this concern we recommend that this proposed permanganate COD method is a quick and economical approach for estimating the maximum permanganate NOD for aquifer materials to support permanganate ISCO site screening and initial design purposes.
机译:为了现场筛选和设计目的,需要有关与含水层材料相关的天然还原物种消耗高锰酸盐的知识,以支持高锰酸盐原位化学氧化(ISCO)应用。已经确定,该消耗不是单值量,而是动力学控制的。确定高锰酸盐天然氧化剂需求量(NOD)的当前方法包括使用混合均匀的批次测试,这很耗时,并且受测试变量(例如浓度,氧化剂与固体的质量比,反应时间和混合条件)的影响。会严重影响结果。在本文中,我们提出了一种使用高锰酸盐的改良化学需氧量(COD)试验,该试验可用于确定含水层材料的最大高锰酸盐NOD。作为比较的初始点,我们使用改进的或高锰酸盐COD方法,传统的重铬酸盐COD方法以及基于充分混合的间歇式反应器的方法,测试了从八个潜在ISCO场所收集的含水层材料。该比较的结果表明,高锰酸盐COD测试结果与充分混合的分批反应器的最大NOD之间没有统计学上的显着差异(alpha = 5%),而重铬酸盐COD测试平均高估了最大NOD 100%。高锰酸盐化学需氧量测试结果与分批测试的最大NOD数据(r = 0.996)以及含水层材料的总有机碳和非晶态铁含量(r = 0.91)高度相关。对此拟议的高锰酸盐COD测试进行的有限敏感性研究表明,怀疑形成的锰氧化物(一种反应副产物)可能导致实验变异性增加。但是,尽管存在这种担忧,我们还是建议此提议的高锰酸盐COD方法是一种快速经济的方法,用于估算含水层材料的最大高锰酸盐NOD,以支持高锰酸盐ISCO现场筛选和初始设计目的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号