...
首页> 外文期刊>Journal of Elasticity >Prediction of the Stress Field and Effective Shear Modulus of Composites Containing Periodic Inclusions Incorporating Interface Effects in Anti-plane Shear
【24h】

Prediction of the Stress Field and Effective Shear Modulus of Composites Containing Periodic Inclusions Incorporating Interface Effects in Anti-plane Shear

机译:包含界面夹杂的周期性夹杂物的复合材料的应力场和有效剪切模量的预测

获取原文
获取原文并翻译 | 示例
           

摘要

We consider the anti-plane shear of a composite containing a periodic array of circular inclusions which incorporate separate interface effects in the presence of uniform remote loading. Using complex variable methods, the corresponding stress distributions and effective shear modulus of the composite are obtained by analyzing a representative unit cell subjected to periodic boundary conditions imposed on its edge. We present several examples to illustrate the interfacial stress field and effective shear modulus relative to the interface parameter and volume fraction of the inclusions. We show that when the volume fraction of the inclusions falls below approximately 9 %, the interfacial stress recovers effectively to that of a single inclusion with the same interface parameter in an infinite plane. We find also that when the shear modulus of the inclusions exceeds twice the shear modulus of the matrix, we can essentially treat each inclusion-matrix interface as being perfectly bonded without inducing significant errors in the effective shear modulus of the composite. Finally, we show that the use of effective medium theories may induce significant errors in the determination of the effective shear modulus of the composite when the inclusions are much softer than the matrix and simultaneously the volume fraction of the inclusions exceeds 50 %.
机译:我们考虑了一种复合材料的反平面剪切,该复合材料包含周期性的圆形夹杂物阵列,在均匀的远程载荷作用下,这些圆形夹杂物具有独立的界面效应。使用复杂变量方法,通过分析在边缘施加周期性边界条件的代表性晶胞,可以获得复合材料的相应应力分布和有效剪切模量。我们用几个例子来说明相对于夹杂物的界面参数和体积分数的界面应力场和有效剪切模量。我们表明,当夹杂物的体积分数下降到大约9%以下时,界面应力可以有效地恢复到无限平面中具有相同界面参数的单个夹杂物的界面应力。我们还发现,当夹杂物的剪切模量超过基体的剪切模量的两倍时,我们可以将每个夹杂物-基体界面基本视为完美结合,而不会在复合材料的有效剪切模量中引起明显误差。最后,我们表明,当夹杂物比基质软得多并且夹杂物的体积分数超过50%时,使用有效的介质理论可能会在确定复合材料的有效剪切模量时引起重大错误。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号