首页> 外文期刊>Journal of applied microbiology >The role of surface physicochemical properties in determining the distribution of the autochthonous microflora in mineral water bottles
【24h】

The role of surface physicochemical properties in determining the distribution of the autochthonous microflora in mineral water bottles

机译:表面理化性质在确定矿泉水瓶中本地微生物群落分布中的作用

获取原文
获取原文并翻译 | 示例
       

摘要

Investigation of the distribution of the viable autolchthonous microflora in three brands of 1-2-month-old bottled mineral water showed that 1.8 * 10~4 (S.E.M. 8.9 * 10~3, n = 5) to 1.2 * 10~5 (S.E.M. 1.3 * 10~4, n = 5) cfu ml~(-1) were planktonic cells while 11 (S.E.M. 4, n = 5)-632 (S.E.M. 176, n = 5) cfu cm~(-2) were found in the biofilm. The biofilm represented between 0.03 and 1.79% of the total viable microbial population in the 1.5 litre bottles studied. Scanning electron microscopy studies showed that the cells adhering to the polyethylene terephthalate (PET) bottles were predominantly rod-shaped, sparsely distributed over the surface. In contrast, the cells adhering to the high density polyethylene (HDPE) caps were found to be mainly clumps of coccoid cells, suggesting that the bottle may provide different microhabitats for different microfloras. Large-scale roughness, such as that observed as lettering inside the cap (average height (z) = 93 #mu#m) was associated with a 46-fold increase in cell numbers. Increased small-scale roughness, as measured by atomic force microscopy on PET and HDPE surfaces (average roughness (R_a) = 5-551 (nm), showed no correlation with adhesion. Investigations of surface hydrophobicity by the sessile drop technique showed that contact angles (#theta#) were greater on the HDPE caps (#theta# 89-96 deg C) than on the PET surfaces (#theta# = 69-80 deg C). However, no correlation was found between contact angle and attached cell numbers. Measurements of surface electrostatic charge by streaming potential showed that the PET carried an overall negative charge, measuring - 15.9 to -16.6 mV in mineral water. No significant change in charge occurred when the monomer composition of the PET was altered. It was concluded that surface roughness, in particular the scale of surface topographical features, is the most important physicochemical surface characteristic determining the distribution of the autochthonous microflora in mineral water bottles.
机译:对三个1至2个月大的瓶装矿泉水中自生微生物菌群的分布进行的调查表明,1.8 * 10〜4(SEM 8.9 * 10〜3,n = 5)至1.2 * 10〜5(SEM) 1.3 * 10〜4,n = 5)cfu ml〜(-1)为浮游细胞,而在其中发现11(SEM 4,n = 5)-632(SEM 176,n = 5)cfu cm〜(-2)。生物膜。在所研究的1.5升瓶中,生物膜占微生物总数的0.03至1.79%。扫描电子显微镜研究表明,粘附在聚对苯二甲酸乙二酯(PET)瓶上的细胞主要是棒状,稀疏地分布在表面上。相比之下,发现粘附在高密度聚乙烯(HDPE)瓶盖上的细胞主要是球状团块细胞,这表明该瓶子可能为不同的菌群提供了不同的微生境。大规模的粗糙度,如观察到的笔帽内部的字母粗糙现象(平均高度(z)= 93#mu#m)与细胞数量增加46倍有关。通过原子力显微镜在PET和HDPE表面上测得的小尺度粗糙度增加(平均粗糙度(R_a)= 5-551(nm))与附着力无关。通过固着滴技术对表面疏水性的研究表明,接触角HDPE瓶盖(#theta#89-96摄氏度)上的#θ(theta#)要大于PET表面(#theta#= 69-80摄氏度)上的(θ)更大,但是,接触角与附着细胞之间没有相关性通过流动电势的表面静电荷测量表明,PET在矿泉水中带有一个整体负电荷,约为-15.9至-16.6 mV,当PET的单体组成发生变化时,电荷没有发生明显变化。表面粗糙度,特别是表面地形特征的规模,是决定矿泉水瓶中自生微生物群落分布的最重要的理化表面特征。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号