Effect of Thermomechanical Degradation of Polypropylene on Mechanical Properties of Wood-Polypropylene Composites

摘要

In this research, the influence of thermomechanically degraded polypropylene (PP) on mechanical properties of beech sawdust-PP composites was studied. For this purpose, a virgin PP (VPP) was thermomechanically degraded by two times extrusion under controlled conditions in a twin-screw extruder at a rotor speed of 100 rpm and a temperature of 190 degrees C. The results showed that melt flow index, flexural modulus, and hardness of PP were significantly increased by extrusion and re-extrusion of VPP. The PP (virgin and recycled PP in each stage) and beech sawdust were compounded at 60% weight sawdust loading in a counter-rotating twin-screw extruder in the presence or absence of maleated polypropylene (MAPP) to produce sawdust-PP composites. The nominal cross section and density of the manufactured composites were 70 x 10 mm(2) and 1 g/cm(3), respectively. From the results, the composites containing recycled PP exhibited higher flexural properties and hardness and lower impact strength. In the presence of MAPP, all mechanical properties increased.