Influence of Powder Particle Size Distribution on Complex Viscosity and Other Properties of Acrylic Bone Cement for Vertebroplasty and Kyphoplasty

摘要

For use in vertebroplasty and kyphoplasty, an acrylic bone cement should possess many characteristics, such as high radiopacity, low and constant viscosity during its application, low value of the maximum temperature reached during the polymerization process (T_(max), a setting time (t_(set) that is neither too low nor too high, and high compressive strength. The objective of this study was to investigate the inluence of the powder particle distribution on various properties of one acrylic bone cement; namely, residual monomer content, T_(max,) t_(seV) complex viscosity, storage and loss moduli, injectability, and quasi-static compressive strength and modulus. It was found that the formulations that possessed the most suitable complex viscosity-versos-mixing time characteristics are those in which the ratio of the large poly(methyl methacrylate) beads (of mean diameter 118.4 mu m) to the small ones (of mean diameter 69.7 (mu m) was at least 90 percent w/w. For these formulations, the values of the other properties determined were acceptable.