...
首页> 外文期刊>Journal of biomaterials science >Wear of '100 Mrad' cross-linked polyethylene: effects of packaging after 30 years real-time shelf-aging
【24h】

Wear of '100 Mrad' cross-linked polyethylene: effects of packaging after 30 years real-time shelf-aging

机译:“ 100 Mrad”交联聚乙烯的磨损:30年实时货架老化后的包装效果

获取原文
获取原文并翻译 | 示例

摘要

Studies have shown that gamma-irradiation of polyethylene (PE) generally results in degradation by surface oxidation. However, from 1970 to 1978 Oonishi et al. used ultra-high-molecular-weight polyethylene (UHMWPE) cross-linked and sterilized by 100 Mrad of gamma-irradiation in air (100 Mrad PE) for total hip prostheses, and obtained excellent clinical results extending for 30 years. In the present study, we used a hip joint simulator to investigate the wear characteristics of 100 Mrad PE cups which had been shelf-aged for an extremely long period (30 years). The PE cups, aged in an air-containing triple polyethylene package for 30 years (packaged 100 Mrad PE), showed low wear with 3.4 mg of weight loss, even after 5 x 10(6) cycles. In contrast, non-packaged 100 Mrad PE showed considerable wear: 47.0 mg at run-in ((0-0.25) x 10(6) cycles) and 114.1 mg at the end of 5 x 10(6) cycles. The substantially, lower wear even in the presence of an oxidized surface layer for the packaged 100 Mrad PE, was comparable to the low wear seen on retrieved 100 Mrad PE after 30 years of clinical use. The long-term shelf-storage conditions, which affect the surface oxidative degradation of PE, are assumed to be the key factor in the wear-resistance of gamma-irradiated UHMWPE.
机译:研究表明,γ辐照聚乙烯(PE)通常会导致表面氧化降解。然而,从1970年到1978年Oonishi等人。将超高分子量聚乙烯(UHMWPE)交联并通过空气中100 Mrad的γ射线辐照(100 Mrad PE)进行灭菌,以用于整个髋关节假体,并获得了长达30年的出色临床效果。在本研究中,我们使用了髋关节模拟器来研究100 Mrad PE杯的磨损特性,这些杯已经过了很长的寿命(30年)。 PE杯在装有空气的三层聚乙烯包装中(包装为100 Mrad PE)老化30年(即使经过5 x 10(6)个循环后)也显示出低磨损和3.4 mg的重量减轻。相比之下,未包装的100 Mrad PE表现出相当大的磨损:磨合(0-0.25)x 10(6)周期为47.0 mg,5 x 10(6)周期结束时为114.1 mg。对于包装的100 Mrad PE,即使在存在氧化表面层的情况下,磨损也明显较低,这与30年临床使用后回收的100 Mrad PE的低磨损相当。长期的储存条件会影响PE的表面氧化降解,被认为是伽马射线辐照的UHMWPE耐磨性的关键因素。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号