...
首页> 外文期刊>Journal of Applied Polymer Science >Low-loss passive polymer waveguides by using chlorofluorinated polyimides
【24h】

Low-loss passive polymer waveguides by using chlorofluorinated polyimides

机译:使用氯氟化聚酰亚胺的低损耗无源聚合物波导

获取原文
获取原文并翻译 | 示例

摘要

Chlorofluorinated polyimides were prepared from 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA), 2,2 prime -bis(trifluoromethyl)-4,4 prime -diaminobiphenyl (PFMB), and 2,2 prime -dichloro-4,4 prime -diaminobiphenyl (DCB) for optical waveguide applications. The resulting optical polymers exhibited good thermal stability, controllable refractive index, and low optical loss in the optical communication wavelengths of 1.3 and 1.55 µm. The control of refractive indices of the polymers was achieved by copolymerization of 6FDA/PFMB and 6FDA/DCB. As the amount of DCB was increased, the refractive indices of polymer were increased. The effect of addition of chlorine on optical properties of polymers such as absorption loss in the near-IR region were also investigated. Rib-type optical waveguides were fabricated using these chlorofluorinated polyimides. These waveguides exhibited low loss of less than 0.4 dB/cm for both TE and TM polarizations.
机译:氯氟化聚酰亚胺是由2,2-双(3,4-二羧苯基)六氟丙烷二酐(6FDA),2,2伯-双(三氟甲基)-4,4伯-二氨基联苯(PFMB)和2,2伯-二氯制备的-4,4伯-二氨基联苯(DCB),用于光波导应用。所得的光学聚合物在1.3和1.55μm的光通信波长中表现出良好的热稳定性,可控的折射率和低的光损耗。通过6FDA / PFMB和6FDA / DCB的共聚来控制聚合物的折射率。随着DCB量的增加,聚合物的折射率增加。还研究了添加氯对聚合物光学性能的影响,例如在近红外区域的吸收损耗。使用这些氯氟化聚酰亚胺来制造肋型光波导。这些波导在TE和TM偏振方面均表现出小于0.4 dB / cm的低损耗。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号