...
首页> 外文期刊>Journal of Applied Polymer Science >OPTOTHERMAL PROPERTIES OF FIBERS .1. RELATIONS BETWEEN OPTICAL PROPERTIES AND CHANGE OF THE DENSITY AND MECHANICAL LOSS FACTOR FOR ANNEALED POLYESTER FIBERS
【24h】

OPTOTHERMAL PROPERTIES OF FIBERS .1. RELATIONS BETWEEN OPTICAL PROPERTIES AND CHANGE OF THE DENSITY AND MECHANICAL LOSS FACTOR FOR ANNEALED POLYESTER FIBERS

机译:纤维的光学性质1。退火聚酯纤维的光学性质与密度变化和机械损耗因子之间的关系

获取原文
获取原文并翻译 | 示例
           

摘要

Polyester (Egyptain manufacturers) fibers were annealed in the temperature range 80-190 degrees C for time intervals from 1 to 10 h. The density of the annealed fibers was measured by a system based on the theory of vibrating strings. The fiber diameter was also determined, using the laser forward diffraction technique. Refractive indices and birefringence for annealed fibers at different temperatures and constant time, 1 h, were measured by the polarizing interference microscope. The behavior of fiber density and the mechanical loss factor at different annealing temperatures and times were discussed at different optical parameters. The results obtained clarify the effect of annealing time and temperatures on the optical, density, and mechanical loss factor behavior of polyester fibers. Microinterferograms are given for illustration. (C) 1995 John Wiley and Sons, Inc. [References: 17]
机译:聚酯纤维(埃及制造商)在80-190摄氏度的温度范围内退火1到10小时。通过基于振动弦理论的系统来测量退火纤维的密度。还使用激光前向衍射技术确定了纤维直径。通过偏振干涉显微镜测量了退火纤维在不同温度和恒定时间(1小时)下的折射率和双折射。在不同的光学参数下讨论了在不同退火温度和时间下纤维密度和机械损耗因子的行为。获得的结果阐明了退火时间和温度对聚酯纤维的光学,密度和机械损耗因子行为的影响。给出微干涉图用于说明。 (C)1995 John Wiley and Sons,Inc. [参考:17]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号