...
首页> 外文期刊>Journal of Applied Polymer Science >Effect of water and hydrogen sulfide in zinc dimethyldithiocarbamate accelerated sulfur vulcanization
【24h】

Effect of water and hydrogen sulfide in zinc dimethyldithiocarbamate accelerated sulfur vulcanization

机译:水和硫化氢对二甲基二硫代氨基甲酸锌加速硫的硫化作用

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Rubber and the model compound 2,3-dimethyl-2-butene (TME) are vulcanized with zinc dimethyldithiocarbamate [Zn-2(dmtc)(4)] accelerated sulfur formulations. When heated in dry nitrogen, Zn-2(dmtc)(4) is stable at vulcanization temperatures. However, it shows a mass increase when heated in moist nitrogen, indicating strong coordination with water; in a nitrogen/H2S atmosphere rapid degradation to dimethyldithiocarbamic acid (Hdmtc) and ZnS occurs. Model compound studies show that crosslinked sulfides are essentially bis(alkenyl) and confirm the absence of accelerator terminated pendant groups in the vulcanizates, while the ease with which rubber vulcanizates crystallize on cooling in a density column also suggests that pendant groups are largely absent. However, the rates of crystallization, measured as the time for the crystallization process to go to 50% completion, are slower in lightly crosslinked gels than in peroxide cures of similar crosslink density, particularly in the vulcanizates cured in a vacuum; this is interpreted as an indication that some residual pendant groups are present in Zn-2(dmtc)(4) vulcanizates. Water promotes the rate of crosslink formation in both rubber and TME systems, and it is suggested that the strong coordination of water with zinc in Zn-2(dmtc), promotes its reactivity. The H2S liberated in the vulcanization process promotes decomposition of Zn-2(dmtc)(4) to Hdmtc, and this reaction makes and important cntribution to the amount of Hdmtc that is formed in situ. The importance of Hdmtc as an accelerator and its role in providing alternative routes to crosslink formation in Xn(2)(dmtc)(4) accelerated sulfur vulcanization are discussed. It is suggested that water, which is liberated when Hdmtc reacts with ZnO to form Zn-2(dtmc)(4), activated newly formed Zn-2(dmtc)(4) molecules; and this accounts for the beneficial influence of ZnO in Zn-2(dmtc)(4) formulations. (C) 2002 Wiley Periodicals, Inc. [References: 56]
机译:橡胶和模型化合物2,3-二甲基-2-丁烯(TME)用二甲基二硫代氨基甲酸锌[Zn-2(dmtc)(4)]加速硫配方硫化。在干燥氮气中加热时,Zn-2(dmtc)(4)在硫化温度下稳定。然而,当在潮湿的氮气中加热时,它的质量增加,表明与水具有很强的配位性。在氮气/ H2S气氛中,会迅速降解为二甲基二硫代氨基甲酸(Hdmtc)和ZnS。模型化合物的研究表明,交联的硫化物基本上是双(烯基),并证实了硫化橡胶中不存在促进剂封端的侧基,而橡胶硫化橡胶在密度塔中冷却时结晶的难易程度也表明,侧基基本上不存在。然而,以交联密度相似的过氧化物固化剂而言,轻度交联的凝胶中的结晶速率(以完成结晶过程完成50%的时间来衡量)要慢一些,尤其是在真空中固化的硫化橡胶中。这被解释为表明Zn-2(dmtc)(4)硫化物中存在一些残留的侧基。水可促进橡胶和TME体系中交联的形成速率,并且表明水与锌在Zn-2(dmtc)中的强配位可促进其反应性。硫化过程中释放出的H2S促进Zn-2(dmtc)(4)分解为Hdmtc,该反应对就地形成的Hdmtc的量具有重要意义。讨论了Hdmtc作为促进剂的重要性及其在Xn(2)(dmtc)(4)加速硫磺硫化中提供替代途径形成交联的作用。提示当Hdmtc与ZnO反应形成Zn-2(dtmc)(4)时释放的水会激活新形成的Zn-2(dmtc)(4)分子。这解释了ZnO在Zn-2(dmtc)(4)配方中的有益影响。 (C)2002 Wiley Periodicals,Inc. [参考:56]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号