...
首页> 外文期刊>Journal of aerosol medicine and pulmonary drug delivery >Characterization of a reverse-phase perfluorocarbon emulsion for the pulmonary delivery of tobramycin
【24h】

Characterization of a reverse-phase perfluorocarbon emulsion for the pulmonary delivery of tobramycin

机译:用于肺部妥布霉素反相全氟化碳乳剂的表征

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Methods: This study examined emulsion aqueous droplet diameter and number density over 24 hr and emulsion and neat PFC viscosity and surface tension. Additionally, Pseudomonas aeruginosa biofilm growth was measured after 2-hr exposure to emulsion with variable aqueous volume percentages (0.25, 1, and 2.5%) and aqueous tobramycin concentrations (Ca=0.4, 4, and 40 mg/mL). Lastly, the time course of serum and pulmonary tobramycin concentrations was evaluated following APV and conventional aerosolized delivery of tobramycin in rats.Background: Aerosolized delivery of antibiotics is hindered by poor penetration within distal and plugged airways. Antibacterial perfluorocarbon ventilation (APV) is a proposed solution in which the lungs are partially or totally filled with perfluorocarbon (PFC) containing emulsified antibiotics. The purpose of this study was to evaluate emulsion stability and rheological, antibacterial, and pharmacokinetic characteristics.Results: The initial aqueous droplet diameter averaged 1.9±0.2 μm with little change over time. Initial aqueous droplet number density averaged 3.5±1.7×109droplets/mL with a significant (p0.01) decrease over time. Emulsion and PFC viscosity were not significantly different, averaging 1.22±0.03×10-3Pa·sec. The surface tensions of PFC and emulsion were 15.0±0.1×10-3and 14.6±0.6×10-3N/m, respectively, and the aqueous interfacial tensions were 46.7±0.3×10-3and 26.9±11.0×10-3N/m (p0.01), respectively. Biofilm growth decreased markedly with increasing Caand, to a lesser extent, aqueous volume percentage. Tobramycin delivered via APV yielded 2.5 and 10 times larger pulmonary concentrations at 1 and 4 hr post delivery, respectively, and significantly (p0.05) lower serum concentrations compared with aerosolized delivery.Conclusions: The emulsion is bactericidal, retains the rheology necessary for pulmonary delivery, is sufficiently stable for this application, and results in increased pulmonary retention of the antibiotic.
机译:方法:本研究检查了24小时内乳液的水滴直径和数量密度,以及乳液和纯PFC的粘度和表面张力。另外,在暴露于具有可变水体积百分比(0.25、1,和2.5%)和含水妥布霉素浓度(Ca = 0.4、4和40mg / mL)的乳液中2小时后,测量了铜绿假单胞菌生物膜的生长。最后,在大鼠APV和常规雾化妥布霉素雾化给药后,评估了血清和肺妥布霉素浓度的时程。背景:远端和封闭气道渗透不良阻碍了抗生素雾化递送。抗菌全氟化碳通气(APV)是一种建议的解决方案,其中肺部部分或全部充满了含乳化抗生素的全氟化碳(PFC)。这项研究的目的是评估乳液的稳定性以及流变,抗菌和药代动力学特性。结果:初始水滴直径平均为1.9±0.2μm,随时间变化很小。初始水珠数密度平均为3.5±1.7×109滴/ mL,随时间的推移显着(p <0.01)降低。乳液和PFC粘度无明显差异,平均为1.22±0.03×10-3Pa·sec。 PFC和乳液的表面张力分别为15.0±0.1×10-3和14.6±0.6×10-3N / m,水界面张力为46.7±0.3×10-3和26.9±11.0×10-3N / m( p <0.01)。生物膜的生长随着Caand的增加而显着下降,在较小程度上是水体积百分比。通过APV递送的妥布霉素在递送后1和4小时分别产生2.5倍和10倍的肺部浓度,与雾化递送相比,血清浓度显着降低(p <0.05)。结论:该乳剂具有杀菌性,保留了肺部必需的流变性递送对于该应用而言足够稳定,并且导致抗生素在肺部的保留增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号