Energy-efficient reverse osmosis desalination: Effect of retentate recycle and pump and energy recovery device efficiencies

摘要

The development of commercial RO membranes offering high salt rejection and flux has focused more attention on improving desalination process technology. The energy-efficient reverse osmosis (EERO) process has recently been advanced that combines single-stage reverse osmosis (SSRO) with a countercurrent membrane cascade with recycle (CMCR). The SSRO retentate is the feed to the CMCR that employs countercurrent retentate and permeate flow, permeate recycle, and retentate self-recycling via the use of NF membranes in one or more stages. This reduces the foulant load on the RO stage in the CMCR and allows it to run at a higher recovery than conventional SSRO. This option as well as the effects of pump and energy-recovery device (ERD) efficiencies are considered here. For a typical 35 g/L seawater feed and 035 g/L water product, the 4-stage EERO process reduces the osmotic pressure differential (OPD) relative to conventional SSRO by 50% at all overall water recoveries. For pump and ERD efficiencies of 85% and 90%, respectively, the 3-stage EERO process has a 50% overall water recovery at an OPD of 42.7 bar and a net specific energy consumption (SECnet) of 2.323 kWh/m(3), thereby reducing the OPD by 23.1% at the cost of increasing the SECnet by only 3.6% relative to conventional SSRO. For the same efficiencies the 4-stage EERO process can achieve a 75% overall water recovery at an OPD of 55.5 bar and SECnet of 3.773 kWh/m(3), thereby reducing the OPD by 50% and the SECnet by 3.6% relative to conventional SSRO at that recovery. (C) 2015 Elsevier B.V. All rights reserved.