【24h】

A novel brine precipitation process for higher water recovery

机译:一种新颖的盐水沉淀工艺,可提高水的回收率

获取原文
获取原文并翻译 | 示例
           

摘要

A three-step demineralization process for removing scale-forming substances from brine solutions produced from nanofiltration (NF) of water was developed. The process is designed to remove substances that would lead to scale and membrane fouling during additional stages of NF or reverse osmosis (RO). Tests were performed to determine the most suitable dosages and mixing times for each reagent. The first step in the demineralization process employs ferric chloride for removing phosphonate scale inhibitors via co-precipitation with ferric hydroxide. The second step of the process increases the solution pH value to promote carbonate mineral precipitation. The third step involves barium sulfate precipitation promoted by barite seed crystals. Saturation indices for precipitation of mineral solids were simulated using the Phreeqc thermodynamic modeling program. Water recovery from the treated brines was modeled using the ROSA package for simulating permeate and concentrate compositions for NF processes. The three-step demineralization process allowed the recovery rate for the brine solution to be as high as the initial feed water, and achieved a total water recovery of >97%. (C) 2016 Elsevier B.V. All rights reserved.
机译:开发了一种三步脱盐工艺,用于从水的纳滤(NF)产生的盐溶液中去除水垢形成物质。该工艺旨在去除在NF或反渗透(RO)的其他阶段会导致水垢和膜污染的物质。进行测试以确定每种试剂的最合适剂量和混合时间。脱盐过程的第一步是使用氯化铁,通过与氢氧化铁共沉淀来去除膦酸酯类阻垢剂。该方法的第二步增加溶液的pH值,以促进碳酸盐矿物的沉淀。第三步涉及由重晶石种晶体促进的硫酸钡沉淀。使用Phreeqc热力学建模程序模拟了矿物固体沉淀的饱和指数。使用ROSA软件包对从处理过的盐水中回收的水进行建模,以模拟NF工艺的渗透物和浓缩物成分。三步脱盐过程使盐水溶液的回收率与初始给水一样高,并且总水回收率> 97%。 (C)2016 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号