...
首页> 外文期刊>Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology >Application of molecular interaction volume model on removing impurity aluminum from metallurgical grade silicon by vacuum volatilization
【24h】

Application of molecular interaction volume model on removing impurity aluminum from metallurgical grade silicon by vacuum volatilization

机译:分子相互作用体积模型在真空挥发法去除冶金级硅杂质铝中的应用

获取原文
获取原文并翻译 | 示例

摘要

The vacuum volatilization of aluminum from silicon melt is studied by the molecular interaction volume model (MIVM) in this paper. The activities and activity coefficients of components in the Si-Al binary melt were investigated based on the MIVM and the results show that the predicted values of activities are in good agreement with the experimental data. The infinite dilution activity coefficients of Al in the Si-Al binary melt at 1673-2273 K is expressed as log gamma(infinity)(Al)(1) in si = 7.66983 x 10(-5)T-0.43563. The separation coefficient beta(Al), the volatilization rate V-si and the removal efficiency eta(Al) are calculated using the activity coefficients gamma(Si), gamma(Al), and the vapor-liquid equilibrium diagram of Si-Al binary melt. In order to decrease the loss of silicon volatilization and enhance the separation of Al from Si Al binary melt, the optimal temperature and time conditions for Al volatilization are 1773-1973 K and 3-5 ks, respectively. The experimental results show that the removal efficiency of Al is 99.67% by vacuum directional solidification under the optimal condition of vaporization temperature 1873 K, chamber pressure 10(-3) Pa, holding time 3.6 ks and solidification rate 10 mu m/s. (C) 2015 Elsevier Ltd. All rights reserved.
机译:本文通过分子相互作用体积模型(MIVM)研究了硅熔体中铝的真空挥发。基于MIVM对Si-Al二元熔体中的活度和活度系数进行了研究,结果表明活度的预测值与实验数据吻合良好。在1673-2273 K下Si-Al二元熔体中Al的无限稀释活度系数表示为log gamma(infinity)(Al)(1),si = 7.66983 x 10(-5)T-0.43563。使用活度系数γ(Si),γ(Al)和Si-Al二元气液平衡图计算分离系数beta(Al),挥发速率V-si和去除效率eta(Al)熔化。为了减少硅挥发损失并增强Al与Si Al二元熔体的分离,Al挥发的最佳温度和时间条件分别为1773-1973 K和3-5 ks。实验结果表明,在汽化温度1873 K,腔压10(-3)Pa,保温时间3.6 ks,凝固速率10μm / s的最佳条件下,真空定向凝固对Al的去除效率为99.67%。 (C)2015 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号