Three-dimensional CFD modeling and simulation on the performance of steam ejector heat pump for dryer section of the paper machine

摘要

A three-dimensional model of the steam ejector heat pump for the dryer section of the paper machine was developed by applying the Computational Fluid Dynamics (CFD) technique, which provided the pressure and velocity distributions of fluid flow in heat pump. The results indicated that the fluid velocity field in heat pump has an incomplete axially symmetrical distribution. The entrainment ratio of the heat pump initially increases rapidly with the increase of the ejected steam inlet pressure and then decreases after the inlet pressure exceeds one certain value. There exists a critical value for the mixed fluid pressure under the given operating conditions. The optimal ratio of the diameter of constant area mixing section to the steam nozzle throat diameter is about 3.4 and the optimal ratio of length to diameter of constant area mixing section L/D-m is 6. An optimal divergence angle of diffuser was observed under different diffuser length. There is an optimized steam nozzle position under the given operating condition where the maximum of entrainment ratio was observed. The CFD technique is found to be an efficient alternative to predict the ejector performance and the conclusions of the research can provide a beneficial reference for structural optimization design of ejector. (C) 2015 Elsevier Ltd. All rights reserved.