首页> 外文期刊>Hydrometallurgy >Selective leaching of vanadium in calcification-roasted vanadium slag by ammonium carbonate
【24h】

Selective leaching of vanadium in calcification-roasted vanadium slag by ammonium carbonate

机译:碳酸铵对钙化焙烧钒渣中钒的选择性浸出

获取原文
获取原文并翻译 | 示例
           

摘要

Calcification roasting is a clean way to extract vanadium from the vanadium slag. But the subsequent sulfuric acid leaching brings the impurity of phosphorous into the leach liquor of vanadium and thus inhibits the precipitation of vanadates for vanadium recovery. In this paper, a novel selective leaching method using ammonium carbonate ((NH4)(2)CO3) has been proposed for the extraction of vanadium in the calcification-roasted vanadium slag. The (NH4)(2)CO3 leaching can dissolve calcium vanadates with high selectivity while maintaining other impurities including phosphorous in the solid residue. Ammonium vanadate can be precipitated directly by cooling down without pH adjustment or ammonium salt addition, which makes the (NH4)(2)CO3 leaching cost-effective. The waste water after precipitation can be recycled back to the leaching circuit, showing the friendliness of (NH4)(2)CO3 leaching method to the environment. With (NH4)(2)CO3 leaching, 96.0% of vanadium can be dissolved while the corresponding leaching efficiency of phosphorous is 92% using the most suitable condition of solid/liquid ratio 1:20, particle size 45-74 pm, leaching temperature 80 degrees C, (NH4)(2)CO3 concentration 600 g/L and leaching time 70 min. This work has laid the foundation for the industrial application of ammonium carbonate leaching and provided new insights into selective leaching of valuable elements in complex minerals. (C) 2015 Elsevier B.V. All rights reserved.
机译:钙化焙烧是从钒渣中提取钒的一种干净方法。但是随后的硫酸浸出将磷的杂质带入钒的浸出液中,因此抑制了钒酸盐的沉淀以回收钒。本文提出了一种使用碳酸铵((NH4)(2)CO3)的新型选择性浸出方法,用于钙化焙烧钒渣中钒的萃取。 (NH4)(2)CO3浸出可以高选择性地溶解钒酸钙,同时在固体残留物中保留其他杂质,包括磷。钒酸铵可通过冷却直接沉淀而无需调节pH值或不添加铵盐,这使得(NH4)(2)CO3浸出具有成本效益。沉淀后的废水可以循环回浸出回路,表明(NH4)(2)CO3浸出方法对环境友好。使用(NH4)(2)CO3浸出,在固液比为1:20,粒径为45-74 pm,浸出温度最合适的条件下,可以溶解96.0%的钒,而相应的磷的浸出效率为92%。 80摄氏度,(NH4)(2)CO3浓度600 g / L,浸出时间70分钟。这项工作为碳酸铵浸出的工业应用奠定了基础,并为复杂矿物中有价值元素的选择性浸出提供了新的见解。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号