Pyrrolidinium Imides:Promising Ionic Liquids for Direct Capture of Elemental Mercury from Flue Gas

摘要

A new approach to vapor phase elemental mercury capture has been explored;this approach exploits an ionic liquid coating layer to oxidize elemental mercury for subsequent immobilization by chelating ligands.The room temperature ionic liquid 1-butyl-1-methyl pyrrolidinium bis(trifluoromethane sulfonyl)imide(P14)was selected for study based on its oxidation potential window,thermal stability,and low vapor pressure.Tests were also completed in which KMnO4 was added to P14 to form a new ionic liquid,P14-KMnO4,with a higher oxidation potential.In room-temperature bulk liquid phase capture experiments,59% of the elemental mercury in the inlet gas was captured using P14 alone;mercury capture using P14-KMnO4 was quantitative.P14 and P14-KMnO4 coatings were successfully applied to mesoporous silica substrates and to silica substrates functionalized with mercury chelating ligands.The coating layers'were found to be thermally stable up to 300°C.Fixed-bed tests of nonfunctionalized silica coated with P14 showed an elemental mercury uptake of 2.7 mg/g adsorbent at 160°C;at the same temperature,functionalized silica coated with P14-KMnO4 showed an elemental mercury capacity of at least 7.2 mg/g adsorbent,several times higher than that of activated carbon.The empty bed gas residence time in these tests was 0.04 s.A chelating adsorbent incorporating P14 in the coating layer,may be capable of simultaneous removal of elemental and oxidized mercury from coal combustion flue gases.