首页> 外文期刊>Wireless communications & mobile computing >Goodput and throughput comparison of single-hop and multi-hop routing for IEEE 802.11 DCF-based wireless networks under hidden terminal existence
【24h】

Goodput and throughput comparison of single-hop and multi-hop routing for IEEE 802.11 DCF-based wireless networks under hidden terminal existence

机译:隐藏终端存在下基于IEEE 802.11 DCF的无线网络单跳和多跳路由的吞吐量和吞吐量比较

获取原文
获取原文并翻译 | 示例
           

摘要

We investigate how multi-hop routing affects the goodput and throughput performances of IEEE 802.11 distributed coordination function-based wireless networks compared with direct transmission (single hopping), when medium access control dynamics such as carrier sensing, collisions, retransmissions, and exponential backoff are taken into account under hidden terminal presence. We propose a semi-Markov chain-based goodput and throughput model for IEEE 802.11-based wireless networks, which works accurately with both multi-hopping and single hopping for different network topologies and over a large range of traffic loads. Results show that, under light traffic, there is little benefit of parallel transmissions and both single-hop and multi-hop routing achieve the same end-to-end goodput. Under moderate traffic, concurrent transmissions are favorable as multi-hopping improves the goodput up to 730% with respect to single hopping for dense networks. At heavy traffic, multi-hopping becomes unstable because of increased packet collisions and network congestion, and single-hopping achieves higher network layer goodput compared with multi-hop routing. As for the link layer throughput is concerned, multi-hopping increases throughput 75 times for large networks, whereas single hopping may become advantageous for small networks. The results point out that the end-to-end goodput can be improved by adaptively switching between single hopping and multi-hopping according to the traffic load and topology. Copyright (C) 2015 John Wiley & Sons, Ltd.
机译:与直接传输(单跳)相比,当介质访问控制动力学(如载波侦听,冲突,重传和指数退避)为时,我们研究了多跳路由如何影响基于IEEE 802.11分布式协调功能的无线网络的吞吐量和吞吐量性能。考虑到隐藏终端的存在。我们为基于IEEE 802.11的无线网络提出了一个基于半马尔可夫链的吞吐量和吞吐量模型,该模型可以针对不同的网络拓扑结构以及在较大的通信量负载下,准确地与多跳和单跳一起工作。结果表明,在流量很小的情况下,并行传输几乎没有好处,单跳和多跳路由都可以实现相同的端到端吞吐量。在中等流量的情况下,并发传输是有利的,因为相对于密集网络的单跳而言,多跳将吞吐量提高了730%。在高流量下,由于增加的数据包冲突和网络拥塞,多跳变得不稳定,并且与多跳路由相比,单跳实现了更高的网络层吞吐量。关于链路层吞吐量,对于大型网络,多跳将吞吐量提高了75倍,而对于小型网络,单跳可能变得有利。结果表明,根据业务量和拓扑结构自适应地在单跳和多跳之间切换可以提高端到端的吞吐量。版权所有(C)2015 John Wiley&Sons,Ltd.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号